 |
 |
Mark 10 Grips & Attachements for Force Testing
Mark 10 Grips & Attachements for Force Testing
 Wire Terminal Grips |
 Wire / Rope Grips |
 Wheel Wire Terminal Grips |
 Dual Roller Grip |
 Adjustable Dual Roller Grip |
 High Capacity Eccentric Roller Grip |
 Film & Paper Grips |
 Pneumatic Grip |
 Parallel Jaw Grip |
 Parallel Jaw Vise-Action Grip |
 Self-Tightening Wedge Grip |
 Miniature Component Grip |
 Bottle Grip |
 Cap Grip |
 Jacob's Chuck Grip |
 Compression Plates |
 Rubber Tip |
 Swivel Adapter |
 STH Attachments |
 Jacob's Chuck Grip |
 Hooks |
 Flat Heads |
 Extension Rods |
 Chisel Points |
 Cone Points |
 V Grooves |
 Thread Adapters |
 Padded Attachments |
 Lock Ring |
 Anchor Pin |
 Eye End Adapters |
 Coefficient of Friction |
 Score Bend Fixture |
 Opening Force Fixture Set |
 Vise Grips |
 Miniature Wedge |
 Multi-Jaw Grip |
 Universal Cap Grip |
 Clevis Grip |
 High Capacity Wire/Rope Grip |
 Bend Fixtures |
 Loop Tack Fixture |
 Syringe Compression Fixture |
 Cork Pull Fixture |
| Model | Description (model) | Capacity | Price |
|---|---|---|---|
 |
Wire Terminal Grips (G1001, G1001-1, G1001-2) Pull testing of wire and tube terminals/crimps, and other slender samples |
200 lb | $218 |
 |
Dual Roller Grip (G1002) Pull testing of wires, tubes, and other slender samples |
200 lb | $171 |
 |
Film & Paper Grips (G1008, G1015-1, G1015-2, G1015-3) Tensile testing of film, paper, and other thin materials |
100 lb | from $237 |
 |
Pneumatic Grip (G1046, AC1019 Connection Kit) Tensile testing of film, paper, and other thin materials |
100 lb | $570 |
 |
Parallel Jaw Grip (G1013) General tensile testing |
200 lb | $180 |
 |
200 lb, 1200 lb, 2000 lb | from $489.25 | |
 |
100 lb | $185.25 | |
 |
Miniature Component Grip (G1003) For a variety of pull-off tests |
30 lb | $133 |
  |
Padded Attachments (G1019, G1020, G1021) Padded attachments for ergonomics analysis and job task analysis |
500 lb | from $38 |
 |
Bottle Grip (G1023) Torque and top-load testing of closures, bottles |
100 lb-in | $475 |
 |
Cap Grip (G1053) Secures bottle caps during torque testing |
100 lb-in | $308 |
 |
Jacob's Chuck Grip for TST (G1022-1, G1022-2, G1022-3) Secures a fixture or sample during torque testing |
100 lb-in | from $171 |
 |
Compression Plates (G1009, G1009-1) Compresses samples during testing |
200 & 500 lb | from $38 |
 |
Rubber Tip (G1011) Simulates a human finger in compression testing |
50 lb | $28 |
 |
Swivel Adapter (G1018, G1018-1) Swiveling adapter, for use between gripping fixtures |
200 & 500 lb | $61 |
  |
Series STH Attachments (G1016-1, G1016-2, G1016-3, G1017) Secures fixtures, bits, or samples during torque testing, attaches to STH torque sensors |
100 lb-in | from $118 |
 |
Jacob's Chuck Grip (Force) (G1010) Secures a fixture or sample during tensile testing |
30 lb | $95 |
 |
Hooks (G1028, G1038, G1035, G1042) General tensile testing |
up to 1000 lbs | from $19 |
 |
Flat Heads (G1029, G1036) General compression testing |
200 & 500 lb | from $19 |
 |
Extension Rods (G1024, G1024-1, G1024-2, G1031, G1031-1, G1031-2) For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing |
200 & 500 lb | from $19 |
 |
Chisel Points (G1025, G1032) Compression testing |
200 & 500 lb | from $19 |
 |
Cone Points (G1026, G1033) Compression testing |
200 & 500 lb | from $19 |
 |
V Grooves (G1027, G1034) Compression testing |
200 & 500 lb | from $19 |
 |
Thread Adapters (G1050, G1051, G1054, G1039, G1030, G1047, G1048, G1040, G1037, G1049, G1041) For use between force gauges, test stands, and other grips or attachments |
up to 1000 lbs | from $19 |
