Imada MV-275 Motorized Vertical Test Stands

Imada MV-275 left above, MV-275S with Distance meter on right above Force gauges and accessories sold seperately

Imada MV-275 Motorized Vertical Test Stand Model MV-275 - MV-275S -    Optional LP-99 Lexan Safety Shield, Shipping Wt: 40 lbs.

MV-275 without distance meter
MV-275S with distance meter
Maximum load 275 lbf

• Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
• One stand for both compression (push) and tension (pull) tests
• Wide speed range: 0.4 � 9.4 in/min (optional speed ranges available)
• Clearance 16 inches
• No programming required
• Optional digital distance meter and Speed Configurations

Imada MV-275 motorized test stands offer basic force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.

Speed control, quick return and emergency stop are standard features. The Imada MV-275 accepts any of the standard range Imada force gauges.�Digital distance meter included with MV-275S model.

Speed Configurations

• Standard Speed: 0.4 ~ 9.4 in/min
• Optional High Speed: 0.7 ~ 23 in/min
• Optional Low Speed: 0.15 ~ 4.2 in/min

AP-002 Adapter Plate is available to mount most other force gauges to IMADA test stands

Optional Lexan Safety Shield � LP-99

• 1/4" unbreakable lexan
• Helps protect personnel from injury by containing debris during testing
• Allows access to the control panel

The lexan safety shield offers protection to the operators of motorized test stands. Access to the test stand controls is still available through the front of the shield. Made of 1/4" lexan, it is virtually unbreakable and will contain the debris from destructive testing. Helps to prevent accidental injuries. Fits all Imada motorized vertical test stands. Dimensions 16.5" x 15.75" x 31.5"