home ScalesGalore - Where you'll find the ideal scale for every weighing need
Imada
Authorized Dealer

Tension Meters

Accessories

Torque Sensor

Force Gauge

Digital Gauge

Torque Gauge

Grips

Test Stands

Tension Meters
Imada DIS-IP Digital Torque Testers
FREE Ground Shipping *
From: $1,205.00
Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lbf-ft. It has an accuracy of ± .5% F.S., ± 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint.
 

Accessories
Imada Wire Wrapping Grips
FREE Ground Shipping *
From: $280.00
Use wire wrapping grips to test the tensile strength of wires, filaments, fibers, etc.
Imada Wire Wedge Grips
FREE Ground Shipping *
From: $395.00
Easy-to-clamp, spring-loaded wire wedge grip
Imada Wire Terminal Grips
FREE Ground Shipping *
From: $275.00
Grips for wire terminal testing, opens to 6mm.
Imada Wire Crimp Test Fixtures
FREE Ground Shipping *
From: $285.00
Check wire crimp terminals with these test fixtures.
Imada Wedge Grips
FREE Ground Shipping *
From: $360.00
90 Degree Peel Slide Bearing Table
Imada Vise Mounting Plate
FREE Ground Shipping *
From: $160.00
Imada AP-200V Vise Mounting Plate for DWT-200
Imada Thin Film Grips
FREE Ground Shipping *
From: $125.00
Pin grip accommodates small diameter wires and filaments.
Imada Tape Grips
FREE Ground Shipping *
From: $280.00
Self-tightening “buckle-type”mechanism tape grips ensure slip-free operation.
Imada T-Slot Table
FREE Ground Shipping *
From: $395.00
Use the T-Slot Table for easy exchanging and positioning of grips.
Imada Stepless One-Way Clutch
FREE Ground Shipping *
From: $110.00
Imada CA-150 Stepless one-way clutch (CW), 1/4inch drive, 150 lbf-in for DIW-15
Imada Soft Joint
FREE Ground Shipping *
From: $100.00
Joint Simulator for DI-4B-25. HardJoint, 14mm Hex Drive. Intergral impact torque tester.
Imada SJ Spring Adapters
FREE Ground Shipping *
From: $175.00
Imada SJ-200E Spring Adapter for DI-1M-50
Imada RS-232 Cable
FREE Ground Shipping *
From: $75.00
Cable for ZTS and ZTA
Imada Ratchet Clutch
FREE Ground Shipping *
From: $135.00
Imada RA-700 Ratchet clutch, 700 lbf-in, 3/8 Inch drive for DIW-20 or DIW-75
Imada Puncture Fixtures
FREE Ground Shipping *
From: $475.00
Use the puncture fixtures for films to secure the test sample and check the strength of liquid crystal film, auto battery covers, thin aluminum, PET bottles, retort pouches, etc.
Imada Multi Terminal Grips
FREE Ground Shipping *
From: $385.00
WG-3 Multi Terminal Grips have 12 wire gauge apertures (up to 8mm) on the turret. Locate and lock the appropriate size.
Imada Large Flat Head
FREE Ground Shipping *
From: $55.00
Large Flat Heads are suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing.
Imada Impact Torque Tester With Remote Sensor
FREE Ground Shipping *
From: $4,875.00
Impact Torque Testers with Remote Sensor. Super heavy duty.
Imada Hard Joint
FREE Ground Shipping *
From: $100.00
Joint Simulator for DI-4B-25. Hard Joint, 14mm Hex Drive
Imada Gauge Extender Plate
FREE Ground Shipping *
From: $300.00
High cpacity gauge extender plate.
Imada Force Control Cable
FREE Ground Shipping *
From: $75.00
Force control cable for MX / MH and ZTS / ZTA
Imada Degree Peel Slide Bearing Table
FREE Ground Shipping *
From: $850.00
90 Degree Peel Slide Bearing Table
Imada Data Button
FREE Ground Shipping *
From: $145.00
DB-1 is a simple, compact, one channel interface that enables the user to send measurement data to a PC running SW-1, Imada data acquisition software, or other software.
Imada Data Acquisition Software
FREE Ground Shipping *
From: $199.00
SW-1 Software. For DPS and the DPSH.
Imada Compression Fixtures
FREE Ground Shipping *
From: $95.00
Swivel Compression Plates are made in various shapes and sizes.
Imada Coil Cable
FREE Ground Shipping *
From: $75.00
Coil Cable for HTG2 and HTGS
Imada Center-open Vise Grip
FREE Ground Shipping *
From: $425.00
GTW-50L 220 lbf Center-open Vise Grip
Imada Cam Grip
FREE Ground Shipping *
From: $325.00
Cam Grips are ideal for tensile testing of thin, narrow samples.
Imada Bend Stands
FREE Ground Shipping *
From: $560.00
Use bend stands to support test rods, strips, etc. to check their strength.
Imada Analog Cable
FREE Ground Shipping *
From: $75.00
Analog cable for ZTS and ZTA
Imada CB-304 Digimatic Cable
FREE Ground Shipping *
$70.00
Digimatic cable for Z2, Z2H, Z2S, HTG2, and DTX2
Imada CB-308 Digimatic Cable
FREE Ground Shipping *
$75.00
Digimatic cable for ZTS, ZTA
Imada SC-2 Non Impact Torque Testers 100 lbf-in, Cube Adapter
FREE Ground Shipping *
$145.00
Imada SC-2 100 lbf-in, Cube Adapter. Driver Adapter For i- And CD-150M
Imada CB-704 Force Control Cable
FREE Ground Shipping *
$150.00
Force control cable for MX2 / EMX, ZP / ZPH and Z2 / Z2H
Imada Tape Grips TG-50 (50mm wide) - Only with System
FREE Ground Shipping *
$385.00
Self-tightening “buckle-type”mechanism tape grips ensure slip-free operation.
Imada Pincer Wedge Grips PGC-0510 (110 lbf capacity) - Only with System
FREE Ground Shipping *
$395.00
Jaw face width: 10mm Opening width: 0-15mm Pincer Wedge Grips are all purpose jaw grips.
Imada Wedge Grips KC-1001 (220 lbf capacity) - Only with System
FREE Ground Shipping *
$430.00
This spring-loaded wedge grip is ideal for tensile measurements of thick materials.
Imada Tape Grips TG-50 (50mm wide)
FREE Ground Shipping *
$770.00
Self-tightening “buckle-type”mechanism tape grips ensure slip-free operation.
Imada Pincer Wedge Grips PGC-0510 (110 lbf capacity)
FREE Ground Shipping *
$790.00
Jaw face width: 10mm Opening width: 0-15mm Pincer Wedge Grips are all purpose jaw grips.
Imada Wedge Grips KC-1001 (220 lbf capacity)
FREE Ground Shipping *
$860.00
This spring-loaded wedge grip is ideal for tensile measurements of thick materials.

Torque Sensor
Imada NTS-6 Cedar Motorized Rotating Friction Torque Testers
FREE Ground Shipping *
From: $3,450.00
NTS-6 is a motorized friction torque tester that tests the smoothness of rotation of bearings, tightness of oil seals, etc. while turning the sample.
Imada DIW Lightweight Digital Torque Tester
FREE Ground Shipping *
From: $1,430.00
DIW-75 is an extremely lightweight digital torque wrench that tightens or loosens bolts up to 660 lbf-in. The wrench head swivels 300° and can be used in tight places.
Imada DI-12-SL Breakaway / Yield Motorized Torque Testers
FREE Ground Shipping *
From: $3,420.00
DI-12 Motorized Torque Tester drives the test piece at consistent speed - Detects breakaway torque without overtorquing pretightened fasteners - Detects the yield torque of the screw joint - Displays real time torque values and captures peak torque - Tightens fasteners to preprogrammed torque values
Imada DWT-200, Digital Torque Tester for Manual Torque Wrenches
FREE Ground Shipping *
$1,530.00
DWT-200, digital torque tester incorporates a proprietary peak down capture mode that calibrates manual torque wrenches up to 1,500 lbf-in with an accuracy of ± .5% F.S., ± 1 LSD. Other features include selectable Peak Down, Peak, or Real Time measurement modes and selectable units lbf-in, kgf-cm, N-m.

Force Gauge
Imada FB Series Mechanical Force Gauges
FREE Ground Shipping *
From: $430.00
The ergonomic design makes it ideal for hand-held use, or the gauges can be mounted to a test fixture. The zero-tare ring allows you to zero the gauge to compensate for measuring adapters and changes in measuring position
Imada DST Digital Force Gauge
FREE Ground Shipping *
From: $595.00
Imada DS2 digital force gauges with capacities from 7 oz to 220 lbs. RS232, digimatic and analog outputs with programmable high and low setpoints and push button selectable lb, kg and Newton units. Reversible display and ergonomic, durable, heavy duty con

Digital Gauge
Imada ZTS-LM Standard Digital Force Gauge with Luminescent EL Display and Button Sensor
FREE Ground Shipping *
From: $1,465.00
Imada ZTS-LM Digital Force Gauges with Luminescent EL Display and Button Sensor, User-Friendly, Multi-Language Menus Color-coded LED indicators and output signal for Go/No Go testing USB (virtual COM port), RS-232C, Digimatic and Analog outputs
Imada ZTS-DPU Standard Digital Force Gauge with Luminescent EL Display and Remote Sensor
FREE Ground Shipping *
From: $1,175.00
Imada ZTS-DPU Digital Force Gauges with Luminescent EL Display and Remote Sensor, User-Friendly, Multi-Language Menus Color-coded LED indicators and output signal for Go/No Go testing USB (virtual COM port), RS-232C, Digimatic and Analog outputs
Imada ZTS Standard Digital Force Gauge with Luminescent EL Display
FREE Ground Shipping *
From: $1,085.00
Imada ZTS Digital Force Gauges with Luminescent EL Display, User-Friendly, Multi-Language Menus Color-coded LED indicators and output signal for Go/No Go testing USB (virtual COM port), RS-232C, Digimatic and Analog outputs
Imada ZTA-LM Standard Digital Force Gauge with Luminescent EL Display and Button Sensor
FREE Ground Shipping *
From: $1,565.00
Imada ZTA-LM Digital Force Gauges with Luminescent EL Display and Button Sensor, User-Friendly, Multi-Language Menus Color-coded LED indicators and output signal for Go/No Go testing USB (virtual COM port), RS-232C, Digimatic and Analog outputs. Additional features include display force and displacement data with Imada FA test stand, and export gauge memory or save continuous data to USB flash drives
Imada ZTA-DPU Advanced Digital Force Gauge with Luminescent EL Display and Remote Sensor
FREE Ground Shipping *
From: $1,475.00
Imada ZTA-DPU Digital Force Gauges with Luminescent EL Display and Remote Sensor, User-Friendly, Multi-Language Menus Color-coded LED indicators and output signal for Go/No Go testing USB (virtual COM port), RS-232C, Digimatic and Analog outputs. Additional features include display force and displacement data with Imada FA test stand, and export gauge memory or save continuous data to USB flash drives
Imada ZTA Advanced Digital Force Gauge with Luminescent EL Display
FREE Ground Shipping *
From: $1,075.00
Imada ZTA Digital Force Gauges with Luminescent EL Display, User-Friendly, Multi-Language Menus Color-coded LED indicators and output signal for Go/No Go testing USB (virtual COM port), RS-232C, Digimatic and Analog outputs. Additional features including Display force and displacement data with Imada FA test stand and Export gauge memory or save continuous data to USB flash drives.

Torque Gauge
Imada MTG Motorized Cap Torque Testers
FREE Ground Shipping *
From: $6,950.00
Imada’s motorized cap torque tester accommodates sample containers up to 7" in diameter and up to 9.4" in height. Torque markings on the cap vise enable consistent gripping of the cap. Operate in either clockwise or counterclockwise directions.
Imada HTGS Digital Torque Gauge
FREE Ground Shipping *
From: $1,425.00
The HTGS Digital Torque Gauge features a remote torque sensor with a Jacob’s chuck. The Jacob’s chuck can be used to grip a test sample or a wide variety of grips. Test in clockwise or counter-clockwise directions. Selectable measuring units of lbf-in, kgf-cm, or N-cm.
Imada HTG2 Digital Torque Gauges
FREE Ground Shipping *
From: $1,425.00
Imada HTG digital torque gauge offers programmable high/low setpoints for go/no-go testing. Store up to 960 values in memory, which can be transmitted using serial output
Imada DIW Lightweight Digital Torque Tester
FREE Ground Shipping *
From: $1,140.00
Models DIW-15 is extremely lightweight digital torque wrenche that tighten or loosen bolts up to 180 lbf-in. The wrench head swivels 300° and can be used in tight places.
Imada DIS-RL Torque Digital Tester
FREE Ground Shipping *
From: $1,120.00
DIS-RL substantially reduces scrap and rework costs by eliminating over and under-tightening. It is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.
Imada Digital Torque Screwdrivers
FREE Ground Shipping *
From: $485.00
GLK Digital Torque Screwdrivers are compact, lightweight, and feature, LED?and audible alarms, ergonomic handle, push button controls, and are battery powered. Measure torque in peak or real time modes. Measure torque in peak or real time modes. Auto zero mode resets peak measurements automatically (1-10 seconds).
Imada Digital Ratchet Torque Wrenches
FREE Ground Shipping *
From: $485.00
Digital Ratchet Torque Wrenches have a forged steel ratchet head and feature a unique power sensor in the ergonomic handle which accurately detects and analyzes load applied to the grip to enable more precise torque measurement regardless of hand position, unlike other loading point sensitive wrenches.
Imada Digital Adjustable Torque Wrenches
FREE Ground Shipping *
From: $645.00
Digital Adjustable Torque Wrenches expand torque applications to places where a socket wrench cannot work. They feature forged steel jaws and a unique power sensor in the handle which accurately detects and analyzes load applied to the grip, regardless of hand position and specially designed jaws that maintain a constant working length whether open or closed, to enable more precise torque measurement.
Imada DID Torque Tester
FREE Ground Shipping *
From: $685.00
Lightweight digital torque tester / torque screwdriver with stepless one way clutch and up to 35 lb-in capacity. Select lb-in, kg-cm or N-cm units with 400 peak data memory, programmable setpoints, USB and more.
Imada DI-5-RL Digital Torque Testers
FREE Ground Shipping *
From: $1,085.00
Lightweight digital torque tester / torque screwdriver with stepless one way clutch has capacity to 90 lbs, 400 data memory for recall or SPC download, programmable setpoints and more
Imada Data Acquisition Software
FREE Ground Shipping *
From: $199.00
SW-1SV-USB Torque Data Acquisition Software is a highly customized Excel spreadsheet specifically designed for capturing and analyzing peak and first peak data from torque testers with either RS-232 or USB ports.
Imada DTXS Digital Cap Torque Tester
FREE Ground Shipping *
From: $1,635.00
Easy-to-use menus make programming simple in eight languages. Select units, set high/low setpoints, and all other functions in plain language.

Grips
Imada Center-open Vise Grip
FREE Ground Shipping *
From: $425.00
Imada GTW-50R 110 lbf Center-open Vise Grip
Imada FC-20 Thin Film Grip - Only with System
FREE Ground Shipping *
$145.00
Use these spring-loaded grips to check the tensile strength of thin film samples up to 2mm thick
Imada DF-60 Hook for Cardboard Boxes - Only with System
FREE Ground Shipping *
$145.00
Capacity: 44 lbf Width: 60mm Test seal strength with the hook for cardboard boxes.
Imada FC-40 Thin Film Grip - Only with System
FREE Ground Shipping *
$145.00
Use these spring-loaded grips to check the tensile strength of thin film samples up to 2mm thick
Imada GC-15 Jacob's Chuck - Only with System
FREE Ground Shipping *
$145.00
For use with shafts and rods
Imada GC-5 Jacob's Chuck - Only with System
FREE Ground Shipping *
$145.00
For use with shafts and rods
Imada SC-3 Fine Point Grips - Only with System
FREE Ground Shipping *
$145.00
Imada SC-3 Fine Point Grips
Imada SC-8 Fine Point Grips - Only with System
FREE Ground Shipping *
$145.00
Imada SC-8 Fine Point Grips
Imada GT-30 Vise Chuck - Only with System
FREE Ground Shipping *
$150.00
Screw tightened vise is ideal for slip-free attachment to base of test stand. 38mm wide jaw opens to 39mm
Imada WG-100 (GT-30) Vise Chuck - Only with System
FREE Ground Shipping *
$150.00
Screw tightened vise is ideal for slip-free attachment to base of test stand. 38mm wide jaw opens to 39mm
Imada WG-1 Wire Grip - Only with System
FREE Ground Shipping *
$155.00
Imada WG-1 Wire Grip for force testing
Imada WG-3 Multi-Terminal Grip, 220 lb - Only with System
FREE Ground Shipping *
$250.00
Imada wire terminal grip for force testing
Imada PF-1 pull Peeling Attachments - Only with System
FREE Ground Shipping *
$280.00
Measure the peel force of laminated materials, etc
Imada PF-2 Push Peeling Attachments - Only with System
FREE Ground Shipping *
$280.00
Measure the peel force of laminated materials, etc
Imada SC-8 Fine Point Grips
FREE Ground Shipping *
$290.00
Imada SC-8 Fine Point Grips
Imada WG-2 Wire Grip, 220 lb - Only with System
FREE Ground Shipping *
$310.00
Imada WG-2 Wire Grip for force testing
Imada BP-6 Button Puller 6 – 25 mm, 30 lbf capacity - Only with System
FREE Ground Shipping *
$360.00
Imada BP-6 Button Puller
Imada GT-30-1 90 Degree Peel Table (Economical) - Only with System
FREE Ground Shipping *
$425.00
Use the 90 Degree Peel Table in adhesion tests.
Imada Vise Chucks GT-500 (500 lbf capacity) - Only with System
FREE Ground Shipping *
$425.00
Screw tightened vise chucks for slip-free gripping of test samples. May also be used as a Vise Wire Grip.
Imada KC-100 Wedge Grip, 220 lb - Only with System
FREE Ground Shipping *
$430.00
This spring-loaded grip is ideal for tensile measurements of thick materials up to 10mm. 15mm serrated jaw
Imada KC-5000 Wedge Grip, 1100 lb - Only with System
FREE Ground Shipping *
$595.00
This spring-loaded grip is ideal for tensile measurements of thick materials up to 10mm. 15mm serrated jaw
Imada GT-30-1-LF 90 Degree Peel Table (Economical) - Only with System
FREE Ground Shipping *
$675.00
Use the 90 Degree Peel Table in adhesion tests.
Imada BP-6 Button Puller 6 – 25 mm, 30 lbf capacity
FREE Ground Shipping *
$720.00
Imada BP-6 Button Puller
Imada Coefficient of Friction Tester COF-10N-V Vertical Model - Only with System
FREE Ground Shipping *
$1,320.00
Coefficient of friction tester attachment is suitable for motorized horizontal test stands.
Imada Coefficient of Friction Tester COF-2N-V Vertical Model - Only with System
FREE Ground Shipping *
$1,320.00
Coefficient of friction tester attachment is suitable for motorized horizontal test stands.
Imada Thin X-Y Table XY-500N 110 lbf capacity for tension - Only with System
FREE Ground Shipping *
$1,435.00
The Thin X-Y Table has a lower profile for maximum clearance on vertical test stands.
Imada Coefficient of Friction Tester COF-10N Stroke: 150mm (capacity 10N) - Only with System
FREE Ground Shipping *
$1,565.00
Coefficient of friction tester attachment is suitable for motorized horizontal test stands.
Imada Coefficient of Friction Tester COF-2N Stroke: 150mm (capacity 2N) - Only with System
FREE Ground Shipping *
$1,565.00
Coefficient of friction tester attachment is suitable for motorized horizontal test stands.
Imada LH-110 Horizontal Wire Pull Tester 110 lbf
FREE Ground Shipping *
$1,716.00
The LH horizontal, straight-pull, wire terminal testers are designed specifically to test the pull-off force of wire terminal connectors and includes gripping attachments
Imada ACT-220 Automatic Wire Crimp Tester 220 x 0.1 lbf
FREE Ground Shipping *
$3,108.00
The ACT-220 Automatic Wire Crimp Tester is designed to measure the strength of wire crimps, up to 220 lbf (1000 N). This tester features: Easy-to-use menus, EL?electro-luminescent display, an easy to use keypad simplify crimp test programming and much more.

Test Stands
Imada Vertical Wheel Test Stands With Distance Meter
FREE Ground Shipping *
From: $1,635.00
The HV series vertical wheel operated force measurement test stands feature a compact design with several ranges, up to 750 lbf capacity.
Imada Vertical Wheel Test Stands
FREE Ground Shipping *
From: $985.00
>The HV series vertical wheel operated force measurement test stands feature a compact design with several ranges, up to 750 lbf capacity. The hand wheel offers precise movement that is ideal for force measurement that requires relatively consistent speed and maximum gauge control.
Imada SVL-220 Manual Lever Test Stand
FREE Ground Shipping *
From: $1,300.00
Model SVL-220 vertical manual lever test stands provide quick, consistent testing. Both compression and tension tests can be performed with a simple downward stroke of the lever. The test stand is designed to provide a simple move to change from compression to tension mode. Return springs reset the lever in compression mode and gravity does the work in tension mode. The stroke can be adjusted with a mechanical limit.
Imada SVH-220 - Vertical Hand Wheel Test Stand
FREE Ground Shipping *
From: $1,300.00
Model SVH-220 are compact test stands with a maximum capacity of 220 lbs. The hand wheel offers precise movement that is ideal for applications requiring relatively consistent speed and maximum gauge control. The gauge remains in position when the wheel is released which allows the user to easily change samples between tests. Hand wheel operation provides repeatable test results from sample to sample. The stroke can be adjusted with a mechanical limit.
Imada NLV-220 Vertical Manual Lever Test Stand
FREE Ground Shipping *
From: $825.00
Vertical lever operated test stand with 220 lb maximum load - distance meter available. Models for either compression or tension testing
Imada NLH-220 Manual Horizontal Test Stand
FREE Ground Shipping *
From: $930.00
Horizontal lever operated test stand with 220 lb maximum load - distance meter available
Imada MX2 Vertical Motorized Test Stand s
FREE Ground Shipping *
From: $3,100.00
MX2 Vertical Motorized Test Stands use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results.
Imada LV-220 Vertical Manual Lever Test Stand
FREE Ground Shipping *
From: $1,075.00
Vertical lever operated test stand with 220 lb maximum load - distance meter available. Models for either compression or tension testing
Imada LH-220 Manual Horizontal Test Stand
FREE Ground Shipping *
From: $895.00
Horizontal lever operated test stand with 220 lb maximum load - distance meter available
Imada KV-11-S Micro Movement Wheel with distance meter Test Stand - 11 lbf
FREE Ground Shipping *
$1,700.00
The KV-11 Micro-Movement Test Stand is designed for small deflection measurements such as membrane switches and other small micro switches. The standard model KV-11S includes a highly accurate digital distance meter. Both models accept any Imada force gauge with a maximum capacity of 11 lbf (5 kgf).
Imada ML-275 Motorized Horizontal Test Stands
FREE Ground Shipping *
$3,570.00
ML-275 motorized test stands offer basic force testing. Combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Speed control, quick return and emergency stop are standard features.
Imada MH-275 Motorized Horizontal Test Stands
FREE Ground Shipping *
$3,950.00
MH-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Imada ML-275S Motorized Horizontal Test Stands with distance meter 275 lb
FREE Ground Shipping *
$4,340.00
ML-275 motorized test stands offer basic force testing. Combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Speed control, quick return and emergency stop are standard features.
Imada MH-275S Motorized Horizontal Test Stands with distance meter - 275 lb
FREE Ground Shipping *
$4,720.00
MH-275S motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Imada MX-500 Vertical Motorized Test Stand - 500 lb
FREE Ground Shipping *
$4,750.00
MX-500 motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range
Imada MX-500-S Vertical Motorized Test Stand with distance meter - 500 lb
FREE Ground Shipping *
$5,500.00
MX-500-S motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range
Imada MH-750 Motorized Test Stand
FREE Ground Shipping *
$5,980.00
MH-750 Motorized Force Measurement Test Stands offer basic force testing capabilities such as adjustable test speed control, force control, quick return and emergency stop functionality.
Imada MH-750BA (Basic Model) Motorized Horizontal Test Stands - 750 lb
FREE Ground Shipping *
$5,980.00
Imada motorized test stands offer consistent and reliable testing. Our Basic or Auto Cycle models are available in Standard, High, and Low speeds. Speed control, quick return and emergency stop are standard features. They accept any of the standard range Imada force gauges and special attachments. Optional digital distance meter is also available.
Imada MH-750AC (Auto Cycle Model) Motorized Horizontal Test Stands - 750 lb
FREE Ground Shipping *
$6,181.00
Imada motorized test stands offer consistent and reliable testing. Our Basic or Auto Cycle models are available in Standard, High, and Low speeds. Speed control, quick return and emergency stop are standard features. They accept any of the standard range Imada force gauges and special attachments. Optional digital distance meter is also available.
Imada MH-750-S Motorized Test Stand
FREE Ground Shipping *
$6,750.00
MH-750-S Motorized Force Measurement Test Stands offer basic force testing capabilities such as adjustable test speed control, force control, quick return and emergency stop functionality.
Imada MH-750BA-S (Basic Model) Motorized Horizontal Test Stand with Distance Meter - 750 lb
FREE Ground Shipping *
$6,750.00
Imada motorized test stands offer consistent and reliable testing. Our Basic or Auto Cycle models are available in Standard, High, and Low speeds. Speed control, quick return and emergency stop are standard features. They accept any of the standard range Imada force gauges and special attachments. Optional digital distance meter is also available.
Imada MH-750AC-S (Auto Cycle Model) Motorized Horizontal Test Stand with Distance Meter - 750 lb
FREE Ground Shipping *
$6,912.50
Imada motorized test stands offer consistent and reliable testing. Our Basic or Auto Cycle models are available in Standard, High, and Low speeds. Speed control, quick return and emergency stop are standard features. They accept any of the standard range Imada force gauges and special attachments. Optional digital distance meter is also available.
Imada EMX-275 Vertical Motorized Test Stand - 275 lb
FREE Ground Shipping *
$7,950.00
The EMX-275 Vertical Motorized Test Stand uses a precision stepper motor and ball screw drive that provide precise movement and smooth operation. Rigid construction assures minimum deflection to ensure consistent force and distance test results
Imada MX-1100 Vertical Motorized Test Stand, 1100 lb
FREE Ground Shipping *
$7,950.00
MX-1100 motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Imada EMX-275-S Vertical Motorized Test Stand With Distance Meter - 275 lb
FREE Ground Shipping *
$8,460.00
MX2 Vertical Motorized Test Stands use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results.
Imada MX-1100-S Vertical Motorized Test Stand with distance meter - 1100 lb
FREE Ground Shipping *
$8,640.00
MX-1100 motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
View Cart | Specials | Contact Us | Home | Blog | Sitemap | Store Policies | Your Account | Enter Monthy Contest

For Orders, Phone toll-free 800-832-0055
All other inquiries, please phone 718-336-5900
FAX 718-627-1313



Scales & Equipment: Value Electronic Scales | Value Mechanical Scales | Lab / Analytical Scales | Baby Scales | Bathroom Scales | Bariatric Scales | Body Fat Monitors | Pro Body Composition Monitors | Calibration Weights | Counting Scales | Crane ScalesDeli/Food/Grocery Scales | Dynamometers | Fish/Game Scales | Floor Scales | Force Gauges | Industrial-Use Scales | Jewelry Scales | Livestock Scales"Legal for Trade" Scales | Medical Scales | Moisture Analyzers | Pallet Scales | Pocket ScalesPortable Spring Gauges | Shipping Scales  | Specialty Medical Scales | Test Stands / Force Measurement | Veterinary Scales


Manufacturers: Acculab digital scales | AND electronic scales | Best Weight mechanical scales| Detecto Physician's Scales | CAS digital scales | Chatillon/Ametek mechanical and electronic scales | DigiWeigh Economical Scales | Dillon Crane Scales, Dynamometers & Force Testing Products| Easy Weigh Legal for Trade Scales | Health O Meter Scales | Hoto Instruments | Imada Force Measurement | InScale Floor Scales | Mark-10 Force Testing | Mettler Toledo® | Minx Economical Pocket Scales | Ohaus electronic and mechanical scales | Tanita digital scales | Salter Brecknell | Sartorius Lab Balances | Seca Medical Scales | Great Gift Ideas



© 2000 2019 scalesgalore.com   All rights reserved.
Myaccount cart home Home 0