MH-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. |
 |
MH-275 without distance meter
MH-275S with distance meter
Maximum load 275 lbf
|
|
Force gauge and attachments are sold separately
|
MH-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
- One stand for both compression (push) and tension (pull) tests
- Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
- Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control Force Control operation with Imada Z Series force gauges
- Wide speed range: 0.3 – 7 in/min (optional speed ranges available)
- Stroke 9.5"
- Optional timer and digital distance meter
- Conditional Overload Prevention
Connect the MH-275 test stand with an Imada Series force gauge and enable force controlled testing and Conditional Overload Prevention.
High/Low Set Point Force Control -
Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.
One Way Force Control -
Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.
Speed control, quick return and emergency stop are standard features. The MH-275 accepts any of the standard range Imada force gauges. Optional timer and digital distance meter available.
AP-002 Adapter Plate is available to mount most other force gauges to IMADA test stands.
Speed Configurations |
Standard Speed |
0.3~7"/min |
*Optional High Speed |
0.6~15.7"/min |
*Optional Low Speed |
0.2~4.2"/min |
* Specify Speed When Ordering
Dimensions
|