Model |
LMA110-SET-P |
LMA100-SET-P |
Capacity x Readability |
40 x 0.001 g |
100 x 0.0001 g |
Reproducibility |
1 mg |
0.1 mg |
Calibration |
External |
Internal or External |
Display of results |
0.01% |
Reproducibility of the measurement |
Starting at an initial sample weight of approx. 1 g: ± 0.2% Starting at an initial sample weight of approx. 5 g: ± 0.05% |
Method of measurement |
Loss on Drying |
Recommended moisture range |
1.00–99.90% |
Heat source |
Four parallel infrared quartz cylinders |
Modular configuration |
Optional up to 4 heater modules connectable |
Internal printer |
Optional internal thermal printer, 40 character graphic |
Temperature range and adjustment |
30–210°C in one-degree increments |
Temperature steps |
Programmable, one or two |
Standby temperature |
Standby temperature selectable from 30–160°C |
Temperature display |
Display of target temperature and actual temperature during the measurement and in standby mode |
Measured value display |
Weight loss in mg % moisture % dry weight % volatiles % moisture/dry weight
|
Modes of operation |
Standard Test or Concentration mode |
Endpoint determination |
Timer mode, value falls below a defined weight loss per time unit (%/min), trend shutoff |
Program storage |
60 programs, fail-safe storable |
Data storage |
Storage 999 results with statistics: average, SD, RSD, high and low |
Temperature adjustment |
Optional fixture for internal electronic two-point-adjustment |
Adjustment of the weighing system |
External manual |
Ideal initial weight |
Audio and visual display for programmable target sample weight addition
|
Initial sample weight lock |
Lockable initial sample weight for optimal repeatability |
Pass-Fail-function |
Programmable target value including limiting values, pass-fail-information after the measurement |
Sample-ID |
Numeric, numeric incrementing, alphanumeric or turned off |
User management |
20 users password protected storable |
Password protection |
Password protection against undesired adjustment of parameters |
Languages |
English, Spanish, German, French, Italian, Portuguese |
Date and time settings |
dd|mm| yy, mm|dd| yy, 12 h- or 24 h-format |
Saving mode |
Integrated clock timer to switch on and turn off the analyzer Programmable sleeping mode after a longer period of non-use |
Display |
Illuminated VGA-display |
Parameter and data input |
Sealed membrane witht audible tactile feedback |
Real-time curves |
Real-time curves of the loss in weight (% or gram) as well of the temperature pattern during and after the measurement |
Acoustical signals |
Key stroke, ideal weight met and end of test, selectable on or off |
System status indicator lights |
Two tri-color LEDs (balance & heater) on front of heater module |
Data input|output |
Serial and Ethernet |
Printout of the protocol |
Internal thermal printer, 40 character graphic |
Printout format |
Configurable printout: selectable header (3 lines), analyzer info, operator, Sample ID, calibration info, program name, program parameters, interval print, weight info, result and signature line |
Weighing system |
Monolithic weighing system for high-precision results |
Balance spill protection |
Reservoir under draft shield to collect liquids, powders or pellets |
Operating conditions |
15–40°C (59–104°F) | 10–85% rel. humidity, no condensation |
Power requirements |
90-250 VAC 50|60 Hz self-adjusting power supply |
Housing dimensions (W+D+H) |
41.3 x 49.5 x23.5 cm (164 x 191 x 94 in) modules combined |
Weight |
10 kg (22 lbs.) modules combined |
Warranty |
2 years |