![Sartorius Practum Analytical Balance](../global/images/product_2/alt/alt_10532.jpg)
The new Secura® is a laboratory balance that does far more than set new standards in metrological specifications. Beyond its technical specs, Secura® also gives you the security and serenity of knowing that you have done everything right according to best practices to ensure the quality of your measurement results, compliance with regulatory requirements and your efficiency as well
First, the new operating concept of Secura® will noticeably ease your daily workload during weighing and, second, its APC function – Advanced Pharma Compliance – will relieve you from tedious and time-consuming documentation and monitoring tasks.
These two benefits, in combination with legendary Sartorius quality, make reliable weighing in regulated areas easier than ever before
Always Correctly Leveled with Sartorius LevelControl
Secura® has an optoelectronic sensor that continuously checks to see if the balance is perfectly level. If it detects any outof- tolerances, you will be immediately alerted to this pending risk and see specific guidance prompts to help you level the balance. Output of the weighing data over the interface port will be temporarily interrupted until the balance has been correctly leveled again.
This means you can rest assured knowing that only correct data is transmitted. During leveling, you will not have to change your seated position. More importantly, when working with toxic substances under a laboratory fume hood, you will not have to lean over the balance while leveling it. As a result, Secura® rules out the risk of health hazards. more
Regulatory Compliance with Expert Support
Do you use your Secura® or other instruments in a regulated area and have to comply with a multitude of requirements, regulations and directives? Relax. Sartorius Lab Products & Services will provide you with the appropriate expert services specifically tailored to ensure compliance with the strict requirements of the pharmaceutical industry – and not just for balances
Risk Minimization – IQ | OQ Documentation
Do you need qualification documents as proof of suitability to be able to use your Secura® in a regulated area? Sartorius Lab Products & Services will support you by providing trained specialists on site. We will generate the documents you need according to risk-based test plans and test reports for installation and operational qualification.
Stress-Free USP Minimum Sample Weight Measurement
Compliance with the USP minimum sample weight requirements with absolute process reliability? No problem for the new Secura®.
The display clearly indicates when the minimum sample weight is below the required minimum limit. In addition, the balance will temporarily block data transfer to a printer or a device connected to its interface port. This gives you peace of mind knowing that inadequate data cannot be inadvertently processed further.
Our specially trained service staff will determine the minimum sample weight for you right at the balance’s site of installation, program it into your Secura® and attach a corresponding verification seal to the balance.
|
|
Sartorius Secura balances Specs:
Specifications Chart for Analytical Balances (0.001 g)
Model |
Secura 213-1S |
Secura 313-1S |
Secura 513-1S |
Secura 613-1S |
Secura 1103-1S |
Price |
![Sartorius Secura213-1S Milligram Balance 210 x 0.001 g Sartorius Secura213-1S Mi](../global/images/product_2/329/32956_100X100.jpg)
$2,226.15
|
![Sartorius Secura313-1S Milligram Balance 310 x 0.001 g Sartorius Secura313-1S Mi](../global/images/product_2/329/32957_100X100.jpg)
$2,425.05
|
![Sartorius Secura513-1S Milligram Balance 510 x 0.001 g Sartorius Secura513-1S Mi](../global/images/product_2/329/32958_100X100.jpg)
$3,037.05
|
![Sartorius Secura613-1S Milligram Balance 610 x 0.001 g Sartorius Secura613-1S Mi](../global/images/product_2/374/37488_100X100.jpg)
$3,235.95
|
![Sartorius Secura1103-1S Milligram Balance 1100 x 0.001 g Sartorius Secura1103-1S M](../global/images/product_2/460/46069_100X100.jpg)
$4,704.75
|
Capacity x Readability |
210 x 0.001 g |
310 x 0.001 g |
510 x 0.001 g |
610 x 0.001 g |
1100 x 0.001 g |
NTEP Model |
- |
Secura 313-1NUS |
- |
Secura 613-1NUS |
Secura 1103-1NUS |
- |
$2,425.05
|
- |
$3,235.95
|
$4,704.75
|
Legal for Trade Capacity x Readability |
310g x 1 mg |
610g x 1 mg |
1100g x 1 mg |
NTEP CO# 21-013 Canada AM-6163 |
NTEP CO# 21-013 Canada AM-6163 |
Repeatability |
1 mg |
1 mg |
1 mg |
1 mg |
1 mg |
Linearity |
2 mg |
2 mg |
2 mg |
2 mg |
2 mg |
Min. sample weight according to USP, typical |
1.5 g |
1.5 g |
1.5 g |
1.5 g |
1.5 g |
Temperature limits |
for verified models with activated isoCAL +10oC | +30oC |
Typical stabilization time (seconds) |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
Weighing pan size Dia |
120 mm |
120 mm |
120 mm |
120 mm |
120 mm |
Weighing chamber height |
209 mm |
209 mm |
209 mm |
209 mm |
209 mm |
Dimensions, D x W x H |
360 x 216 x 320 mm - 14.1 x 8.5 x 12.6 inch |
Levelling |
Intelligent, optoelectronic level sensor with alarm function and interactive user guidance for reliable and safe leveling |
APC functions |
Monitoring of compliance with the USP minimum sample weight limits – SQmin |
Password protection of setup settings |
Fully automatic temperature- and time-controlled internal adjustment – isoCAL |
Temporary blockage of data transfer to printer or computer when uncertain weighing results are detected, such as when the result is below the USP minimum sample weight limit, the balance is not levelled or isoCAL adjustment needs to be performed |
Storage of all data of adjustment procedures – Cal Audit Trail |
Built-in application programs |
Special lab applications such as Mixing, Components, Statistics and Conversion; plus standard lab applications such as Weighing, Density, Percentage, Checkweighing, Peak Hold, Counting and Unstable Conditions |
Interface |
mini USB |
Automatic recognition of Sartorius printer models YDP30 or YDP40 |
Direct data transfer to Microsoft® Windows programs |
Programmable interval for data output |
Choice of SBI, xBPI, table format or text format data transfer protocols |
Display |
Touch screen with Sartorius graphical user interface optimized for users in pharmaceutical laboratories |
Specifications Chart for Toploading Balances (0.01 g - 0.1 g)
Model |
Secura 612-1S |
Secura 1102-1S |
Secura 2102-1S |
Secura 3102-1S |
Secura 5102-1S |
Secura 6102-1S |
Secura 3101-1S |
Secura 6101-1S |
Price |
![Sartorius Secura612-1S Toploading Balance 610 x 0.01 g Sartorius Secura612-1S To](../global/images/product_2/374/37489_100X100.jpg)
$1,912.50
|
![Sartorius Secura1102-1S Toploading Balance 1100 x 0.01 g Sartorius Secura1102-1S T](../global/images/product_2/329/32959_100X100.jpg)
$2,119.05
|
![Sartorius Secura2102-1S Toploading Balance 2100 x 0.01 g Sartorius Secura2102-1S T](../global/images/product_2/329/32960_100X100.jpg)
$2,524.50
|
![Sartorius Secura3102-1S Toploading Balance 3100 x 0.01 g Sartorius Secura3102-1S T](../global/images/product_2/329/32961_100X100.jpg)
$2,731.05
|
![Sartorius Secura5102-1S Toploading Balance 5100 x 0.01 g Sartorius Secura5102-1S T](../global/images/product_2/329/32962_100X100.jpg)
$3,144.15
|
![Sartorius Secura6102-1S Toploading Balance 6100 x 0.01 g Sartorius Secura6102-1S T](../global/images/product_2/374/37490_100X100.jpg)
$3,327.75
|
![Sartorius Secura3101-1S Toploading Balance 3100 x 0.1 g Sartorius Secura3101-1S T](../global/images/product_2/460/46079_100X100.jpg)
$2,034.90
|
![Sartorius Secura 6101-1S Toploading Balance 6100 x 0.1 g Sartorius Secura 6101-1S](../global/images/product_2/460/46081_100X100.jpg)
$2,333.25
|
Capacity x Readability |
610 x 0.01 g |
1100 x 0.01 g |
2100 x 0.01 g |
3100 x 0.01 g |
5100 x 0.01 g |
6100 x 0.01 g |
3100 x 0.1 g |
6100 x 0.1 g |
NTEP Model |
Secura - |
Secura 1102-1NUS |
Secura - |
Secura 3102-1NUS |
Secura - |
Secura 6102-1NUS |
Secura - |
Secura 6101-1NUS |
- |
$2,119.05
|
- |
$2,731.05
|
- |
$3,327.75
|
- |
$2,333.25
|
Legal for Trade Capacity x Readability |
1100 g x 10 mg |
3100 g x 10 mg |
6100 g x 10 mg |
6100 g x 0.1 g |
NTEP CO# 21-013 Canada AM-6163 |
NTEP CO# 21-013 Canada AM-6163 |
NTEP CO# 21-013 Canada AM-6163 |
NTEP CO# 21-013 Canada AM-6163 |
Repeatability |
10 mg |
10 mg |
10 mg |
10 mg |
10 mg |
10 mg |
50 mg |
50 mg |
Linearity |
20 mg |
20 mg |
20 mg |
20 mg |
20 mg |
20 mg |
100 mg |
100 mg |
Min. sample weight according to USP, typical |
12 g |
12 g |
12 g |
12 g |
12 g |
12 g |
- |
- |
Temperature limits |
for verified models with activated isoCAL +10oC | +30oC |
Typical stabilization time (seconds) |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
2 |
2 |
Weighing pan size Dia |
180 mm |
180 mm |
180 mm |
180 mm |
180 mm |
180 mm |
180 mm |
180 mm |
Weighing chamber height |
- |
- |
- |
- |
- |
- |
- |
- |
Dimensions, D x W x H |
360 x 216 x 95 mm - 14.1 x 8.5 x 3.75 inch |
Levelling |
Intelligent, optoelectronic level sensor with alarm function and interactive user guidance for reliable and safe leveling |
APC functions |
Monitoring of compliance with the USP minimum sample weight limits – SQmin |
Password protection of setup settings |
Fully automatic temperature- and time-controlled internal adjustment – isoCAL |
Temporary blockage of data transfer to printer or computer when uncertain weighing results are detected, such as when the result is below the USP minimum sample weight limit, the balance is not levelled or isoCAL adjustment needs to be performed |
Storage of all data of adjustment procedures – Cal Audit Trail |
Built-in application programs |
Special lab applications such as Mixing, Components, Statistics and Conversion; plus standard lab applications such as Weighing, Density, Percentage, Checkweighing, Peak Hold, Counting and Unstable Conditions |
Interface |
mini USB |
Automatic recognition of Sartorius printer models YDP30 or YDP40 |
Direct data transfer to Microsoft® Windows programs |
Programmable interval for data output |
Choice of SBI, xBPI, table format or text format data transfer protocols |
Display |
Touch screen with Sartorius graphical user interface optimized for users in pharmaceutical laboratories |
Micro & Semi-Micro & High Capacity Analytical (0.002 mg- 0.1 mg)
Model |
Secura 26-1S |
Secura 125-1S |
Secura 225D1S |
Secura 124-1S |
Secura 224-1S |
Secura 324-1S |
Price |
![Sartorius Secura26-1S Micro Laboratory Balance with isoCal 21 g x 0.002 mg Sartorius Secura26-1S Mic](../global/images/product_2/460/46072_100X100.jpg)
$19,369.80
|
![Sartorius Secura125-1S Semi-Micro Balance 120 g x 0.01 mg Sartorius Secura125-1S Se](../global/images/product_2/402/40212_100X100.jpg)
$6,074.10
|
![Sartorius Secura225D1S Semi-Micro Balance 120 g x 0.01 mg and 220 g x 0.1 mg Sartorius Secura225D1S Se](../global/images/product_2/402/40213_100X100.jpg)
$5,869.25
|
![Sartorius Secura124-1S Analytical Balance 120 x 0.0001 g Sartorius Secura124-1S An](../global/images/product_2/329/32954_100X100.jpg)
$3,395.00
|
![Sartorius Secura224-1S Analytical Balance 220 x 0.0001 g Sartorius Secura224-1S An](../global/images/product_2/329/32955_100X100.jpg)
$4,039.20
|
![Sartorius Secura324-1S Analytical Balance 320 g x 0.1 mg Sartorius Secura324-1S An](../global/images/product_2/402/40214_100X100.jpg)
$4,758.30
|
Capacity x Readability |
21 g x 0.002 mg |
120 g x 0.01 mg |
120 x 0.00001 g 220 g x 0.0001 g |
120 x 0.0001 g |
220 x 0.0001 g |
320 x 0.0001 g |
NTEP Model |
- |
- |
- |
Secura 124-1NUS |
Secura 224-1NUS |
- |
- |
- |
- |
Selected
$3,641.40
|
$4,039.20
|
- |
Legal for Trade Capacity x Readability |
120g x 0.1 mg |
220g x 0.1 mg |
NTEP CO# 21-013 AM-6163 |
Repeatability |
0.004 mg |
0.04 mg |
0.07 mg 0.07 mg |
0.1 mg |
0.1 mg |
0.1 mg |
Linearity |
0.01 mg |
0.1 mg |
0.1 mg 0.2 mg |
0.2 mg |
0.2 mg |
0.2 mg |
Min. sample weight according to USP, typical |
- |
0.025 g |
0.025 g |
0.12 g |
0.12 g |
0.12 g |
Temperature limits |
for verified models with activated isoCAL +10oC | +30oC |
Typical stabilization time (seconds) |
8 |
6 |
6 2 |
2 |
2 |
2 |
Weighing pan size Dia |
50 mm |
80 mm |
80 mm |
90 mm |
90 mm |
90 mm |
Weighing chamber height |
218 mm |
218 mm |
218 mm |
209 mm |
209 mm |
209 mm |
Dimensions, D x W x H |
376 x 214 x 316 mm - 14.8 x 8.4 x 12.4 inch |
360 x 216 x 320 mm - 14.1 x 8.5 x 12.6 inch |
Levelling |
Intelligent, optoelectronic level sensor with alarm function and interactive user guidance for reliable and safe leveling |
APC functions |
Monitoring of compliance with the USP minimum sample weight limits – SQmin |
Password protection of setup settings |
Fully automatic temperature- and time-controlled internal adjustment – isoCAL |
Temporary blockage of data transfer to printer or computer when uncertain weighing results are detected, such as when the result is below the USP minimum sample weight limit, the balance is not levelled or isoCAL adjustment needs to be performed |
Storage of all data of adjustment procedures – Cal Audit Trail |
Built-in application programs |
Special lab applications such as Mixing, Components, Statistics and Conversion; plus standard lab applications such as Weighing, Density, Percentage, Checkweighing, Peak Hold, Counting and Unstable Conditions |
Interface |
mini USB |
Automatic recognition of Sartorius printer models YDP30 or YDP40 |
Direct data transfer to Microsoft® Windows programs |
Programmable interval for data output |
Choice of SBI, xBPI, table format or text format data transfer protocols |
Display |
Touch screen with Sartorius graphical user interface optimized for users in pharmaceutical laboratories |
Sartorius Secura Precision Analytical balances:
Best Results – Quality Documentation Made Easy
Secura® features a Cal Audit Trail function to document the quality of each weigh-in procedure you perform. Each adjustment procedure, including any non-conformities, are recorded by the balance, can be viewed on the touch screen and, if necessary, can be transferred over the balance’s interface to a computer or to a Sartorius laboratory printer.
No Risk Due to Temperature Fluctuations
Temperature fluctuations have an influence on the accuracy of your weighing results.
This is why every Secura® comes equipped with the internal adjustment function isoCAL that ensures consistently accurate results.
Secura® can be configured to prompt you to launch this procedure or to have isoCAL take care of this as soon as an activation threshold is reached.
The Cal Audit Trail function records each isoCAL procedure performed so it can be traced for your quality assurance.
Cleanability to Secure the Best Results
Cleanliness is one of the main prerequisites in the laboratory to prevent contamination and ensure work area safety.
That’s why Sartorius placed a premium on designing Secura® to enable easy and thorough cleaning.
Sleek, resistant surfaces plus clear contours and few edges ensure that Secura® will help you stay compliant with all hygiene requirements.
Security by Password Protection
Secura® comes with password protection to restrict adjustment of the balance settings only to authorized persons. If you set a password, all functions that could change the metrological performance specifications are inactivated.
Interactive User Guidance for Fast GLP- | GMP-Compliant Printouts
If you require traceable documents, Secura® will guide you through the steps for obtaining GLP- | GMP-compliant printouts. The novel user guidance will support you especially for working with traceable sample identification. Used in conjunction with the new premium YDP30 laboratory printer, which is automatically detected by Secura®, the balance generates printouts of the results on standard printer paper or on continuous labels.
|