Imada MV-1100AC Motorized Vertical Test Stand, Auto Cycle |
|
Vertical Motorized test stand with auto-cycle and maximum 1100 lb load more ... |
|
|
|
|
Features
- Max Load: MV-500 - 500 lbs, MV-1100 - 1100 lbs
- One stand for both compression (push) and tension (pull) tests
- Stroke: 16
- Combination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
- Test speed mode: fixed (presettable) or adjustable
Return speed: fixed max. or adjustable
- Auto cycle feature
- Optional dynamic and static distance meter available
Speed Configurations
Model |
MV-500BA |
MV-1100AC |
Standard Speed |
0.3 ~ 9.5 / min |
0.4 ~4.5 / min |
Optional High Speed |
0.5 ~ 15.7 / min |
0.8 ~ 8 / min |
Optional Low Speed |
0.2 ~ 4.7 / min |
0.2 ~ 2 / min |
These motorized test stands offer consistent and reliable testing. The combination of ball screw system and state of the art brushless motor provides extremely smooth and powerful operation over the entire speed range. It features dual speed mode: fixed speed (presettable) and adjustable speed. They accept any of the standard range Imada force gauges. Quick return and Emergency Stop features are also included.
Basic Models: MV-220BA, MV-500 BA
Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the cross head up to the top travel limit at the selected speed. Flip the direction switch down to send the cross head down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.
Auto Cycle Models: MV-220AC, MV-500AC, MV-1100AC
Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes
- Manual Mode
While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head
- Single Cycle Mode
When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse
- Auto Cycle Mode
This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing
|
|
Other Imada MV-500 Motorized Test Stands
|
|
|
|
|
|
|
|