Chatillon Ametek |
|
Chatillon Ametek Compression Plates
From: $13.50
Round compression plates used for general compression testing. Available in aluminium for the testing of soft samples such as cardboard, plastics, rubber, foams, lightweight springs, bottles and cartons. Available in hardened steel for the testing of rubber, plastics, heavy duty springs, building products, composites, and ceramics. more ...
|
|
|
|
Chatillon Ametek Chuck Grips
FREE Ground Shipping *
From: $322.10
Stainless steel Jacobs chuck grips hold small cylindrical samples up to 1/4 inch (6 mm). Has 10-32 thread mounting. Capacity: 20 lb; Weight: 4 oz. Ideal for holding small cylindrical samples during tension or compression testing more ...
|
|
|
|
|
Chatillon GF-12 Miniature Component Grip
FREE Ground Shipping *
$208.05
Manually tightened grip with a 1/16" wide movable jaw for holding small components or parts. The tapered nose allow use in confined spaces. A thumbscrew on the front allows easy installation of samples. The grip is rated for 30 lb capacity> more ... |
|
|
Chatillon GF-54 Three Point Bend Fixture
FREE Ground Shipping *
$407.60
The Model GF-54 grips come in pairs and are designed for compressive three-point bend applications. Grips support unidirectional bending on rigid and semi-rigid materials. Grips mount using #10-32 thread mounting holes (provided)> more ... |
|
|
Chatillon GF-1 Tensile Grips
FREE Ground Shipping *
$532.00
This general purpose tensile grip features jaw faces that are manually tightens to secure specimens from 6mm to 30mm (0.25 to 1.25 in) in diameter. The throat depth is 45mm (1.75 in). A ball socket mounting screw in the upper grip assures proper alignment> more ... |
|
|
Chatillon GF-2 Clevis Grips
FREE Ground Shipping *
$221.40
May be used for testing tension springs, punched specimens or securing odd shaped parts. Clevis pins have concave diameter to assure specimen centering and to secure pin in place while under load. 500 lb capacity> more ... |
|
|
Chatillon GF-5 Cord & Twine Grips
FREE Ground Shipping *
$440.33
Three non-locking pin design for figure 8 wrap of specimen assures center break, and permits quick installation and release of test piece. Throat clearance with pins installed and clearance between pins are both 3/8. 500 lb capacity.> more ... |
|
|
Chatillon GF-8 Adhesive Test Block
FREE Ground Shipping *
$473.10
This fixture has detachable, circular face plates made of hardened steel. A ball socket mounting screw helps keep upper and lower plates parallel and perpendicular to the applied force. 500 lb capacity.> more ... |
|
|
Chatillon GF-3 Wire Grips
FREE Ground Shipping *
$532.00
Grooved snubber, and post design assures center break of flexible wire up to 1/16" diameter. May also be used for testing cord, rubber or filaments. 1 inch dia. aluminum snubber is mounted on swiveling plate so that specimen will align with force when lo> more ... |
|
|
Chatillon GF-53 Miniature Tensile Vise Grips
FREE Ground Shipping *
$556.70
This general purpose tensile grip features jaw faces that are manually tightened to secure miniature specimens. The opening between the faces is 5mm (0.2 in). The throat depth is 12mm (0.5 in).> more ... |
|
|
|
|
Chatillon GF-10 Wire Terminal Test Fixtures
FREE Ground Shipping *
$765.70
Specifically designed to test the ultimate strength of wire/terminal connections. Upper grip consists of self-aligning wheel with 9 equally spaced slots to accommodate standard terminal shank sizes.> more ... |
|
|
Chatillon 01-0671 (TG-34) Thin Film Vise Grip
FREE Ground Shipping *
$948.10
This general purpose, vice action grip is designed to tighten using moveable jaws. The jaw features a tapered nose, which is ideal for very small components or where space is limited. A thumbscrew ensures quick installation and release of the specimen> more ... |
|
|
Chatillon 01-1608 (TG-11) Vise Action Grip
FREE Ground Shipping *
$968.10
This vice action grip features replaceable aluminium facing disks, plus other optional faces made of either leather or rubber for delicate specimens. This grip corresponds to the mechanical testing of steel wire per BS4545:1970> more ... |
|
|
Chatillon GF-9 Universal Tensile Grips
FREE Ground Shipping *
$1,061.00
This self-tightening wedge grip is ideal for specimens 25mm (1.0 in) wide and 6mm (0.25 in) in diameter. The throat depth is 35mm (1.5 in). This grip features a spring force lever, to quickly real ease the jaws, and serrated, hardened steel faces> more ... |
|
|
|
Chatillon 01-2092 (TG-10) Eccentric Roller Grip, 25mm
FREE Ground Shipping *
$1,159.00
General Purpose, self tightening grips feature an eccentric roller design ideal for dumbbell and flat specimens. The roller operates using a basic cam jamming principle. The rollers have a cross hatched, serrated finish that help prevent slipping> more ... |
|
|
Chatillon 01-1829 (TG-12) Bollard Grips
$1,280.00
With this grip, the specimen is wrapped around the bollard and the free end clamped. Grip stresses the specimen are distributed in the material in contact with the bollard circumference. Used on yarn, wool, man-made fibers and other threads and flexible> more ... |
|
|
Chatillon 01-1388 (TG-15) Sliding Wedge Grip
FREE Ground Shipping *
$1,934.00
This general purpose sliding wedge grip is self tightening. It is supplied with standard 25 x 50mm (1.0 x 2.0 in) straight cut jaw faces. Optional jaw faces are available. The TG15 is not supplied when ordering optional jaw faces> more ... |
|
|
|
Chatillon 01-1590 (TG-74) Adjustable Rear Face Vice Grips
FREE Ground Shipping *
$2,123.30
This vice action grip has fully adjustable faces to help with alignment. The grip is supplied with 25mm x 25mm (1.0 x 1.0 in) standard plain jaw faces. Accepts samples up to 4 in (100 mm) with a maximum sample thickness of 0.5 in (12 mm).> more ... |
|
|
|
|
Imada |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imada ACT-220 Automatic Wire Crimp Tester 220 x 0.1 lbf
FREE Ground Shipping *
$3,885.00
The ACT-220 Automatic Wire Crimp Tester is designed to measure the strength of wire crimps, up to 220 lbf (1000 N). This tester features: Easy-to-use menus, EL?electro-luminescent display, an easy to use keypad simplify crimp test programming and much more.> more ... |
|
Mark 10 |
|
|
Mark 10 G1062 Miniature Wedge Grip 100 lb
FREE Ground Shipping *
$228.00
This compact self-tightening grip with a capacity of 100 lb (500 N) is ideal for a range of low force tensile testing of small samples. The serrated steel jaws are easily opened with a spring-loaded lever.> more ... |
|
|
Mark-10 G1107 Snap Hook
FREE Ground Shipping *
$90.25
This hook features a snap clasp, for added safety in pull testing applications. Swiveling action ensures proper alignment> more ... |
|
|
Mark-10 G1077 Clevis Grip - 5/16-18F
FREE Ground Shipping *
$114.00
This grip is designed for ergonomic assessment, spring testing, and other pull testing applications. A spring loaded pin with ball plunger locks into place, for added safety during testing. Included with all Mark-10 ergonomics testing kits.> more ... |
|
|
Mark 10 G1104 Flip Cap Pull Grip #10-32F
FREE Ground Shipping *
$142.50
Designed to engage the tab on a flip cap for pull-off force measurements. A spring-loaded hook retracts as it is lowered into the starting position, then snaps into place below the tab> more ... |
|
|
Mark 10 G1056 Multi-Jaw Grip, 100lb
FREE Ground Shipping *
$280.25
This unique and universal grip is designed for gripping round and irregularly shaped items. Typical applications including pull-off tests of fasteners and components in the toy, clothing, and other industries> more ... |
|
|
Mark-10 G1101 Parallel Jaw Vise-Action Grip, Medium (200 lbF)
FREE Ground Shipping *
$308.75
This grip is ideal for general tensile and pull testing applications up to 200 lbF (1,000 N). Pyramidal jaw faces and generous clearance effectively secure a wide range of sample materials and sizes. Extended jaw lengths are available, to accommodate larger samples. Includes integrated eye end mounting, and requires an eye end adapter to mount to Mark-10 force gauges or force sensors, and test stands.> more ... |
|
|
Mark-10 G1103 Wire / Rope Grip, Medium (200 lbF)
FREE Ground Shipping *
$356.25
Designed for wire, rope, and yarn pull testing applications up to 200 lbF. Secures the free end of the sample via a bollard and vise with rubber-faced jaw.Includes integrated eye end mounting, and requires an eye end adapter to mount to Mark-10 force gauges or force sensors, and test stands.> more ... |
|
|
Mark 10 G1058 Universal Cap Grip, 100 lbin
FREE Ground Shipping *
$375.25
This unique grip is designed to effectively secure samples for torque and pull tests. Typical applications include bottle cap torque testing, lid pull-off testing, and other tests. A matrix of threaded holes allows the serrated steel posts to be placed in positions specific to the test sample, with a broad diameter range of 0.2 - 3.5 in (5.1 - 89.0 mm).> more ... |
|
|
|
Mark-10 G1102 Wire / Rope Grip, Large (1,000 lbF)
FREE Ground Shipping *
$565.25
Designed for wire rope, and yarn pull testing applications upto 1,000 lbF,. Secures the free end of the sample via a bollard and vise. Includes integrated eye end mounting, and requires an eye end adapter to mount to Mark-10 force gauges or force sensors, and test stands.> more ... |
|
|
Mark-10 G1106 Self-centering Vise Grip
FREE Ground Shipping *
$712.50
This general purpose self-centering vise can be used in a wide range of tension and compression testing applications. Wide opening range accommodates large and unique samples. Rugged design permits testing up to 500 lbF (2,500 N). Smooth removable jaws can be field-modified to improve sample gripping characteristics as required for pull testing applications.> more ... |
|
Shimpo |
|
|
|
|