home Industrial & Commercial Scales - ScalesGalore
home Industrial & Commercial Scales - ScalesGalore
Scales > Test Stand >

Accessories



Chatillon Ametek


Mark 10

Chatillon Ametek
Chatillon SPK-TCM-013 3 inch Compression Platen
$243.20
Chatillon SPK-TCM-013 3 inch Compression Platen> more ...
Chatillon SPK-TCM-014 DFS Remote loadcell adapter kit
$243.20
Chatillon SPK-TCM-014 DFS Remote loadcell adapter kit> more ...
Chatillon SPK-TCM-011 T-Slot Mounting Table
$281.20
Chatillon SPK-TCM-011 T-Slot Mounting Table> more ...
Chatillon SPK-TCM-005 Multi Thread plate kit - Female, M6, M12, 5/16-18, 10-32, 1/4-28
$288.80
Chatillon SPK-TCM-005 Multi Thread plate kit - Female, M6, M12, 5/16-18, 10-32, 1/4-28> more ...
Mark 10
Mark 10 ID Jam Washers
From: $20.90
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation. Several thread sizes and variations are available to suit most common test frames, load cells, grips, and force gauges. Eye ends and adapters are available individually or in kits. more ...
Mark 10 Cables and Communication Adapters
FREE Ground Shipping *
From: $20.00
For use with all Mark-10 force gauges and torque gauges powered by rechargeable batteries. more ...
Mark 10 AC1047-X Base / load cell adapter kits
FREE Ground Shipping *
From: $80.75
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation more ...
Mark 10 AC1046-X Grip adapter kits
From: $47.50
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation more ...
Mark 10 AC1045-X Force gauge adapter kit
FREE Ground Shipping *
From: $99.75
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation more ...
Mark-10 AF017 Extended speed range, low for ESM303
FREE Ground Shipping *
$209.00
Extends the standard speed range down to 0.02 in/min (0.5 mm/min).> more ...
Mark-10 WT3002 Ring terminal fixture for WT3-200 or WT3-201M
FREE Ground Shipping *
$209.00
Secures ring terminations. Pin diameters from 1/8 to 3/8 in [3.2 to 9.5 mm].> more ...
Mark-10 G1079 Lock Ring
$20.90
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation. Several thread sizes and variations are available to suit most common test frames, load cells, grips, and force gauges. Eye ends and adapters are available individually or in kits.> more ...
Mark-10 G1080 Anchor Pin
$20.90
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation. Several thread sizes and variations are available to suit most common test frames, load cells, grips, and force gauges. Eye ends and adapters are available individually or in kits.> more ...
Mark-10 G1081 Eye End - #10-32M
$30.40
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation. Several thread sizes and variations are available to suit most common test frames, load cells, grips, and force gauges. Eye ends and adapters are available individually or in kits.> more ...
Mark-10 G1081-1 Eye End - 5/16-18M
$30.40
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation. Several thread sizes and variations are available to suit most common test frames, load cells, grips, and force gauges. Eye ends and adapters are available individually or in kits.> more ...
Mark-10 G1081-2 Eye End - 1/2-20M
$30.40
These adapters provide a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation. Several thread sizes and variations are available to suit most common test frames, load cells, grips, and force gauges. Eye ends and adapters are available individually or in kits.> more ...
Mark-10 E1012 Looped cable (Does not fit into carrying cases. )
$47.50
Mark-10 E1012 Looped cable (Does not fit into carrying cases. )> more ...
Mark-10 AC1064 Load Cell Hardware Kit
FREE Ground Shipping *
$57.00
Load cell mounting hardware kit for ESM303> more ...
Mark-10 AC1060 Base Plate with Matrix of tapped holes for ES10/20
FREE Ground Shipping *
$85.50
Steel base plate has 25 #10-32 threaded holes for fixture mounting> more ...
Mark-10 TSB003 Travel stops kit for TSB
FREE Ground Shipping *
$104.50
more ...
Mark-10 AC1054 Base plate, multiple center hole threads
FREE Ground Shipping *
$128.25
Optional mounting plate, m ultiple hole thread sizes Three thread sizes are provided [#10-32, 5/16-18, and 1/2-20], along with an array of four 1/4-28 holes> more ...
Mark-10 AC1055 Base plate, matrix of threaded holes
FREE Ground Shipping *
$128.25
Optional mounting plate, threaded hole matrix A matrix of #10-32 threaded holes is provided, along with a 5/16-18 center hole.> more ...
Mark-10 ES001NI Set of Brackets for Indicator
FREE Ground Shipping *
$133.00
Mounting kit for 9.5 mm dia. indicator stem (indicator not included)> more ...
Mark-10 ES001 Dial Indicator Kit
FREE Ground Shipping *
$161.50
more ...
Mark-10 TSA002 Horizontal Wall Mounting Kit
FREE Ground Shipping *
$171.00
The Mark 10 TSA/TSAH lever operated force measurement test stand is a perfect solution for quick-action pull testing and compression testing of up to 750 lb of tensile or compressive force. Modular design> more ...
Mark-10 AF016 Independent up and down speeds for ESM303
FREE Ground Shipping *
$180.50
Individually configure speeds for the up and down directions> more ...
Mark-10 ESM003-2 Column Extension, 12 in
FREE Ground Shipping *
$199.50
more ...
Mark-10 AF013 Auto return for ESM303
FREE Ground Shipping *
$209.00
The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit> more ...
Mark-10 AF018 Extended speed range, high for ESM303
FREE Next Day Air Saturday Shipping *
$209.00
Extends the standard speed range up to 45 in/min (1,100 mm/min).> more ...
Mark-10 AF019 Break detection for ESM303
FREE Ground Shipping *
$209.00
Crosshead stops at a sudden drop in force. Programmable percentage of peak force.> more ...
Mark-10 ESM003-3 Column Extension, 24 in
FREE Ground Shipping *
$228.00
24 inch column extension for ESM / ES30 - 24 in (600 mm),> more ...
Mark-10 TSA003 Table Assembly
FREE Ground Shipping *
$228.00
The Mark 10 TSA/TSAH lever operated force measurement test stand is a perfect solution for quick-action pull testing and compression testing of up to 750 lb of tensile or compressive force. Modular design> more ...
Mark-10 TSF002 Mounting Kit
FREE Ground Shipping *
$232.75
more ...
Mark-10 E1013 Myometer ki (Does not fit into carrying cases. Requires E1006 hook.)
FREE Ground Shipping *
$294.50
Mark-10 E1013 Myometer ki (Does not fit into carrying cases. Requires E1006 hook.) ncludes tabletop mounting kit for force gauge, strap, and mounting screws. Hook not included.> more ...
Mark-10 AF008 FollowMeTM Force-Based Manual Positioning for ESM303
FREE Ground Shipping *
$299.25
Using your hand as your guide, push and pull on the load cell or force gauge to move the crosshead. Responsive enough for quick positioning as well as fine adjustments> more ...
Mark-10 AF011 Programmable travel set points for ESM303
FREE Ground Shipping *
$299.25
The stand stops at or cycles between programmable upper and lower travel distances.> more ...
Mark-10 AF012 Programmable travel set points for ESM303
FREE Ground Shipping *
$299.25
Protects a force gauge or force sensor against overload. Program the desired percentage of full scale of the gauge. Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output> more ...
Mark-10 AF014 Cycling / dwell time for ESM303
FREE Ground Shipping *
$299.25
Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.> more ...
Mark-10 AF021 Preload / sample touch for ESM303
FREE Ground Shipping *
$299.25
Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.> more ...
Mark-10 ES002 Digital Indicator Kit
FREE Ground Shipping *
$370.50
1” displacement, 0.0005” / 0.01 mm resolution. Includes zero and in/mm selector buttons. Mounts onto the test stand and can be repositioned.> more ...
Mark-10 AF020 Load holding for ESM303
FREE Ground Shipping *
$470.25
Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time> more ...
Mark-10 SF016 Independent up and down speeds
FREE Ground Shipping *
$479.75
Individually configure speeds for the up and down directions.> more ...
Mark-10 SF013 Auto return
FREE Ground Shipping *
$532.00
The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the other limit.> more ...
Mark-10 SF017 Extended speed range, low
FREE Ground Shipping *
$532.00
Extends the standard speed range down to 0.001 in/min (0.02 mm/min).> more ...
Mark-10 SF018 Extended speed range, high (ESM1500 only)
FREE Ground Shipping *
$532.00
Extends the standard speed range up to 90 in/min (2,300 mm/min).> more ...
Mark-10 SF018-1 Extended speed range, high (ESM1500S or ESM-750S only)
FREE Ground Shipping *
$532.00
Mark-10 SF018-1 Extended speed range, high (ESM1500S or ESM-750S only)> more ...
Mark-10 SF019 Break detection
FREE Ground Shipping *
$532.00
Crosshead stops at a sudden drop in force. Programmable percentage of peak force.> more ...
Mark-10 SF008 FollowMe force-based manual positioning
FREE Ground Shipping *
$536.75
Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.> more ...
Mark-10 WF013 Date & time stamp option for WT3-201M
FREE Ground Shipping *
$589.00
A date and time stamp is applied to each saved data point> more ...
Mark-10 AF022 Profiles for ESM303
FREE Ground Shipping *
$598.50
Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.> more ...
Mark-10 WF011 Pull to load option for WT3-201M
FREE Ground Shipping *
$641.25
The tester will stop when the specified load has been reached..> more ...
Mark-10 SF021 Preload / sample touch
FREE Ground Shipping *
$655.50
Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.> more ...
Mark-10 TSC001 Digital Travel Display
FREE Ground Shipping *
$741.00
more ...
Mark-10 TSA001 Digital Travel Display
FREE Ground Shipping *
$745.75
The Mark 10 TSA/TSAH lever operated force measurement test stand is a perfect solution for quick-action pull testing and compression testing of up to 750 lb of tensile or compressive force. Modular design> more ...
Mark-10 SF012 Overload protection
FREE Ground Shipping *
$779.00
Protects a force sensor or force gauge against overload. Program the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the stand to interface with virtually any gauge with analog output.> more ...
Mark-10 SF014 Cycling / dwell time
FREE Ground Shipping *
$779.00
Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Same as auto-return, at the same speed in each direction. Add SF016 for independent up and down speeds.> more ...
Mark-10 SF020 Loadholding
FREE Ground Shipping *
$783.75
Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.> more ...
Mark-10 ESM001 Digital Travel Display for ESM - 6 inches / 150mm
FREE Ground Shipping *
$845.50
Digital travel display, 6 in x 0.0005 in (150 x 0.01 mm)> more ...
Mark-10 TSF001 Digital Travel Display
FREE Ground Shipping *
$845.50
more ...
Mark-10 WF010 Save multiple profiles option for WT3-201M
FREE Ground Shipping *
$850.25
Save and recall sets of test parameters, such as speed, pass/fail limits, unit of measurement, etc. Maximum of 500 profiles may be stored..> more ...
Mark-10 SF011 Programmable travel set points
FREE Ground Shipping *
$893.00
The stand stops at or cycles between programmable upper and lower travel distances.> more ...
Mark-10 WF012 Load holding option for WT3-201M
FREE Ground Shipping *
$959.50
The tester will stop and maintain a specified load for a specified period of time...> more ...
Mark-10 TST001 Digital Angle Indicator
FREE Ground Shipping *
$1,078.25
more ...
Mark-10 AF009 Travel indication with USB output for ESM303
FREE Ground Shipping *
$1,092.50
Travel is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoderbased designs. Backlash and nonlinearity are virtually eliminated> more ...
Mark-10 AF010 Computer control via USB for ESM303
FREE Ground Shipping *
$1,092.50
The ESM303 may be fully controlled by a PC through a custom-written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).> more ...
Mark-10 SF010 Computer control via USB
FREE Ground Shipping *
$1,106.75
The ESM1500 may be fully controlled by a PC through a custom-written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).> more ...
Mark-10 SF009-1 Travel indication with USB output (ESM1500S or ESM-750S only)
FREE Ground Shipping *
$1,448.75
Travel is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.> more ...
Mark-10 ESM004 Digital Travel Display for ESM - 12 inches / 300mm
FREE Ground Shipping *
$1,638.75
Digital travel display, 12" x 0.0005 (300 mm x 0.01)> more ...
Mark-10 ESM303-003 Safety Shield For ESM303 Test Stand
FREE Ground Shipping *
$1,759.88
This safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator.The shield is constructed of rugged PETG material. It rotates via ultra-smooth bearings in both the clockwise and counter-clockwise directions, guided into the open or closed positions with magnetic detents. An electrical interlock prevents test stand operation while the door is open.> more ...
Mark-10 SF009 Travel indication (ESM1500 only)
FREE Ground Shipping *
$1,885.75
Travel is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.> more ...
Mark-10 WFCOMP Complete options package for WT3-201M
FREE Ground Shipping *
$1,976.00
The tester will stop and maintain a specified load for a specified period of time including WF010 - Profiles , WF011 - Pull to load, WF012 - Load holding, WF013 - Date and time stamp ...> more ...
Mark-10 AFCOMP Complete options package for ESM303
FREE Ground Shipping *
$4,313.00
Includes all functions AF008, AF009, AF010, AF011, AF012, AF013, AF014, AF016, AF017, AF018, AF019, AF020, AF021, AF022,, plus 09-1214 interface cable and 09-1158 USB cable. Requires a Series 7 or 5 gauge or indicator with load cell> more ...
Mark-10 SFCOMP-1 Complete options package for ESM1500S or ESM-750S only
FREE Ground Shipping *
$6,103.75
Any of the below functions may be purchased at time of order or may be activated in the field at a later date via an activation code. A complete options package is also available at a discounted price. The stand is supplied in Demo Mode, a 160-hour time period in which all functions are temporarily enabled.> more ...
Mark-10 SFCOMP Complete options package for ESM1500
FREE Ground Shipping *
$6,493.25
Any of the below functions may be purchased at time of order or may be activated in the field at a later date via an activation code. A complete options package is also available at a discounted price. The stand is supplied in Demo Mode, a 160-hour time period in which all functions are temporarily enabled.> more ...
 
View Cart | Specials | Contact Us | Home | Blog | Sitemap | Store Policies | Your Account | Enter Monthy Contest

For Orders, Phone toll-free 800-832-0055
All other inquiries, please phone 718-336-5900
FAX 718-627-1313
TEXT: 718-336-5900

Chat with us via WhatsApp Chat whatsapp: 718 787 8658



Scales & Equipment: Value Electronic Scales | Value Mechanical Scales | Lab / Analytical Scales | Baby Scales | Bathroom Scales | Bariatric Scales | Body Fat Monitors | Pro Body Composition Monitors | Calibration Weights | Counting Scales | Crane ScalesDeli/Food/Grocery Scales | Dynamometers | Fish/Game Scales | Floor Scales | Force Gauges | Industrial-Use Scales | Jewelry Scales | Livestock Scales"Legal for Trade" Scales | Medical Scales | Moisture Analyzers | Pallet Scales | Pocket ScalesPortable Spring Gauges | Shipping Scales  | Specialty Medical Scales | Test Stands / Force Measurement | Veterinary Scales


Manufacturers: Acculab digital scales | AND electronic scales | Best Weight mechanical scales| Detecto Physician's Scales | CAS digital scales | Chatillon/Ametek mechanical and electronic scales | DigiWeigh Economical Scales | Dillon Crane Scales, Dynamometers & Force Testing Products| Easy Weigh Legal for Trade Scales | Health O Meter Scales | Hoto Instruments | Imada Force Measurement | InScale Floor Scales | Mark-10 Force Testing | Mettler Toledo® | Minx Economical Pocket Scales | Ohaus electronic and mechanical scales | Tanita digital scales | Salter Brecknell | Sartorius Lab Balances | Seca Medical Scales | Great Gift Ideas



© 2000 2024 scalesgalore.com   All rights reserved.
Phone Myaccount cart home Home
×