|
AND AD-5200 and AD-5300 d igital scale indicators with up to 200,000 display resolution, programmable print formats, 2 ASCII outputs, 500 Weigh In / Weigh Out memory and Time and Date standard.
- Up to 200,000 Display Resolution
- 500 Weigh In / Out Memory (32K RAM)
- Built-In & Programmable Macros
- 500 Set Point & Accumulators
- AD-5200 Painted Steel Models
- AD-5300 Stainless Steel Models
- Programable Print Formats
- Table/Wall Mount Brackets
- Up to 60 Updates per Second
- Two (2) ASCII Outputs
- Two (2) Year Warranty
Applications
- Gross, tare and net weighing
- Vehicle and railroad weighing
- Multi-container or axle weighing
- Parts counting and weighing
- Weigh system interface to Distributed Control System
- Batching and process control systems
- Drum filling, tank, hopper, bench and floor scales
- Over/Under check weighing and materials testing
- Chemical and washdown environments
Standard Features
- Display: Bright red LED: 1 inch x 6 digit numeric
- Status Indicators: Gross, net, motion, zero, lb, kg (LED)
- Keyboard: 19 key sealed tactile feel membrane
- Internal Resolution: 20 bit A/D/ Sigma-Delta; 1,048,000 d
- Display Resolution: 200,000 dd industrial; 10,000 dd HB44
- Display Increments: Selectable 1, 2, 5, 10, 20, 50, 100
- Decimal Point: Selectable 0, 1, 2, 3, 4 decimal places
- Conversion Rate: 60 samples/second typical
- Signal Sensitivity: 0.1 uV/graduation (min)
- Signal Range: 0.5 mV/V to 6 mV/V
- Load Cell Excitation: 10 ±0.5VDC (-5 to +5)
- Load Cell Power: 12 x 350 W or 24 x 700 W load cells
- Auto Zero Tracking: 0-60 dd in 1/4 dd increments
- Auto Zero Delay: 0-25 seconds in 0.1 second increments
- Motion Detect: 0-60 dd in 1/4 dd increments
- Motion Delay: 0-25 seconds in 0.1 second increments
- Digital Filter: 0-18 selectable filter (DSP) levels
- Calibration: Selectable multi-point (up to 5) digital calibration to linearize input signal
- Watchdog Timer: Enable / disable fault tolerant operation
- RFI Protection: Signal, excitation and sense lines
- RAM: 32K provides 500 ID storage (parts, etc.)
Communications:
- Serial Port 1: Simplex RS232 or 20mA current loop
- Serial Port 2: Duplex RS232, 20mA or RS485
- Digital Port: 3 inputs and 3 outputs; low active (TTL)
- Print Formats: 4 user configurable print formats
General Specifications:
- Power: 110/220VAC ±10% at 50/60 Hz or 12-28 VDC
- Power Consumption: 10W at 115VAC, 6W at 12VDC
- Operating Temperature: -10 to +40 °C
- Enclosure: NEMA 4 / IP66 stainless steel washdown
- Net Weight: 6 lbs
- Warranty: 2 year limited
Modes of Operation:
-
Mode 0 - Normal: Basic, gross, tare and net weighing
-
Mode 1 - FIll to Setpoint: Single setpoint fill with relay output control and weight print
-
Mode 2 - Over / Under Checkweigh: Provides 3TTL outputs and 2 setpoints to indicate over, under and between weight conditions. Outputs can activate lights or alarms.
-
Mode 3 - Vehicle Weigh In / Out with Totals: Weigh-in / Out program for up to 500 vehicles; Maintains running totals for each vehicle; Provides reporting functions
-
Mode 4 - Multi-Container / Axle Auto Weighing: Auto weighs and prints each weight placed on the scale; Each weight is sequentially numbered and accumulated; The total can be printed manually or automatically; Provides traffic light control.
-
Mode 5 - Auto Axle Weigh (Long Scales): Same as Mode 4 but previous axles are auto tared
-
Mode 6 - ID Tare, Print and Total: Provides tare entry and recall by ID; Prints ID, sequence number and GTN weights; Keeps running totals by ID: Provides reporting functions
-
Mode 7 - Peak Hold Mode: Display or print gross or net weight
Options
- Parts Counting: Parts counting and weighing program
- Analog Output Module: Fully isolated 0-10VDC or 4-20mA; 16 bit resolution; 650W load resistance
- Relay Box: 4 channel external relay box
- Relay Modules: Input / output solid state (AC/DC) relays
- Clock Module: Time and date clock Y2K and leap year compliant
- High Speed (HS): 100 samples per second conversion rate; High speed process control applications
- EZ-LINK: PC software; Facilitates configuration and Scale Basic programming
|
