Included with instrument: All include certificate of calibration, manual and batteries. Plastic carry case included for EDx-1T to EDx-50T. Higher capacities include rugged plywood storage crate. Instruments with shackles include centering spacers (EDx-20T & up) and shackle storage crate (EDx-20T to EDx-75T). Display backlight

Model	EDx–1T (EDx-2.5K )	EDx–2T (EDx-5K)	EDx–5T (EDx-10K)	EDx–10T (EDx-25K)	EDx–20T (EDx-50K)	EDx–50T (EDx-100K)	EDx–75T (EDx-160K)	EDx–100T (EDx-220K)	EDx-150T (EDx-330K)	EDx-250T (EDx-550K)
EDxtreme with two shackles & backlight	36188-0032	36188-0040	36188-0057	36188-0065	36188-0073	-	-	-	-	-
EDxtreme with two shackles & radioready** & backlight	36169-0035	36169-0043	36169-0050	36169-0068	36169-0076	36169-0084	36169-0126	36169-0092	36169-0118	36169-0100
Capacity x Resolution Normal	2,500 x 2 lb	5,000 x 5 lb	10,000 x 10 lb	25,000 x 20 lb	50,000 x 50 lb	100,000 x 100 lb	160,000 x 100 lb	220,000 x 200 lb	330,000 x 200 lb	550,000 x 500 lb
	1,000 x 1 kg	2,000 x 2 kg	5,000 x 5 kg	10,000 x 10 kg	20,000 x 20 kg	50,000 x 50 kg	75,000 x 50 kg	100,000 x 100 kg	150,000 x 100 kg	250,000 x 200 kg
	10,000 x 10 N	20,000 x 20 N	50,000 x 50 N	100,000 x 100 N	200,000 x 200 N	500,000 x 500 N	-	-	-	-
Capacity x Resolution Enhanced	2,500 x 0.5 lb	5,000 x 1 lb	10,000 x 2 lb	25,000 x 5 lb	50,000 x 10 lb	100,000 x 20 lb	160,000 x 50 lb	220,000 x 50 lb	330,000 x 100 lb	550,000 x 200 lb
	1,000 x 0.2 kg	2,000 x 0.5 kg	5,000 x 1 kg	10,000 x 2 kg	20,000 x 5 kg	50,000 x 10 kg	75,000 x 20 kg	100,000 x 20 kg	150,000 x 50 kg	250,000 x 50 kg
	10,000 x 2 N	20,000 x 5 N	50,000 x 10 N	100,000 x 20 N	200,000 x 50 N	500,000 x 100 N	-	-	-	-
Body Construction and Overload Design	Aircraft quality - 2024 Aluminum - 700% Ultimate overload protection			Aircraft quality - E4340 Alloy Steel - 500% Ultimate overload protection			Aircraft quality - E4340 Alloy Steel - 400% Ultimate overload protection
Radio/ Hardwired Communicator with Backlight	36170-0016 More info

• Popular industry standard shackles insure proper fit
• Battery compartment – easy access without tools
• Sturdy aircraft-quality aluminum or plated alloy steel case on high-capacity models
• High-resolution dot-matrix LCD display offers large numbers without confusing abbreviations or multipliers
• Injection molded, thick Lexan panels offer superior impact protection
• Softkey interface allows easy and intuitive operation and configuration
• NEMA 4X / IP55 designed for weather and water resistance
• Rounded ends reduce weight and prevent binding and snagging with rigging

Models available in capacities from 2500 to 550,000 lbf (1000 to 250,000 kgf).

The EDxtreme exemplifies the trademark precision and rugged construction of Dillon dynamometers. Its highly refined design draws on the inherent strengths of premium-grade materials to achieve a 5:1 minimum factor of safety.

While the EDxtreme may be configured for something as simple as a digital hanging scale, it offers a higher level of intelligence. With user-defined functions and sophisticated communication options, the EDxtreme readily adapts to multi-tasking operations or multilink systems capable of monitoring a series of critical stress points from a single location — it is the definition of application versatility.

Signature features of the EDxtreme

Building a precision instrument that can survive real-world punishment requires masterful engineering. This is where Dillon’s experience shines through. The engineers assigned to the EDxtreme drew on a depth of industrial application knowledge and conducted exhaustive materials testing to achieve the highest structural integrity.

• Superior strength and corrosion resistance – High capacity models are constructed of electroless nickelplated aircraft-quality alloy steel. Lower capacity models are anodized aircraft-quality aluminum.
• 5:1 factor of safety – This measure of strength and safety is maintained at all capacities. Computer modeling confirms the low stress and long product life that is inherent in the EDxtreme design
• Retained hardware - Allows permanent attachment of centering spacers, which eliminates fumbling during high capacity rigging.
• NEMA 4X/IP55 – The EDxtreme is clearly the choice for reliability in any environment – in-plant or out on the job site.

High resolution and accurate repeatable readings are essential to proper weighing. The higher standards set for the EDxtreme meant taking the time to ensure that material characteristics, load element design and strain gage meshed perfectly. The result of that effort is a typical accuracy of 0.1% of full scale capacity. The enhanced resolution mode of 1 part in 5000 provides the level of readability needed for refined weighing.

• Exclusive SOFTKEY interface – Dillon has eliminated confusing menus for faster setup and simple operation. In addition to lbf, kgf and Newtons, programmable functions can correct for gravitational variations and allow the use of custom units of measurement.
• Wide-angle LCD – Provides improved readability over a wider viewing angle and is available with backlighting for low light conditions.
• Battery operation – The EDxtreme is powered by twostandard C-cell batteries. Batteries are easily accessible for fast replacement.

Configuration Options

A basic stand-alone model can be easily upgraded “in-the-field” to accommodate changing needs. Remote configuration, data acquisition and single point monitoring of multiple links are all possible with the hardwired or radio communication options available with the EDxtreme.

	1. Stand-alone EDx for simple, direct measurement applications.
	2. Single network with one EDx radio dynamometer and Communicator.
	3. Single network with multiple EDx dynamometers and one Communicator. The Communicator monitors the load at each scale, plus the total weight.
	4. Multiple networks with multiple EDx dynamometers and Communicators.

Communications unlock the full potential of the EDxtreme

One of the foremost reasons for choosing an electronic dynamometer is added functionality. The radio or hardwired options available with the EDxtreme offer the convenience and safety of remote operation. Additionally, data from the dynamometer(s) can be downloaded to a PC via an RS-232 connection for compilation and analysis or to generate hardcopy printouts.

Remote control and radio communications are not new to the Dillon product line. In fact, it is the depth of Dillon’s experience in this area that led to meaningful innovations in the design of the EDxtreme and its optional remote Communicator.

Unlike the single-frequency products on the market today, the EDxtreme radio dynamometer utilizes leading-edge 2.4Ghz radio frequency technology to eliminate common interference. This technology will automatically “hop” from frequency to frequency to establish and maintain the strongest, most reliable communications.

The optional Communicator is an extremely powerful handheld remote that can define the function and manage the operation of one or more EDxtreme dynamometers using wired or radio technologies. Through the programmable SOFTKEY interface, one Communicator can monitor multiple dynamometers within the same airspace. In multiple-link lifting arrays, the Communicator can display readings at any or all lift points and calculate the total load.

Dynamometer Specifications

Communicator Specifications

Radio Specifications