Myaccount cart
ScalesGalore - Where you'll find the ideal scale for every weighing need ScalesGalore - Where you'll find the ideal scale for every weighing need
not valid on polar,tanita
Imada Attachments and Grips
Imada grips and attachments for force test stands and force gauges.
Imada, Inc. provides durable, accurate and precise strength, hardness, torque and force measurement instruments and related force measurement type equipment to a variety of industries
Small Hook
Small Hooks
Large Hook
Large Hooks
Y-HookS
Y-Hooks
Flat Tip
Flat Tips
Conical Tip
Conical Tips
Notched Tip
Notched Tips
Extension Shaft
Extension Shaft
Large Flat Heads
Large Flat Heads
Swivel Compression Plates
Compression Plates
Swivel Compression Spheres
Compression Spheres
Large Compression Fixtures
Burst Compression Fixtures
Puncture Fixtures for Films
Puncture Fixtures for Films
Bend Stands
Bend Stands
Penetrating Pin Attachment
Penetrating Pin
Roller Cam Grip
Roller Cam Grip
Thin Film Grips
Thin Film Grips
Small Chucks
Small Chucks
Pin Grip
Pin Grip
Flat Chucks
Flat Chucks
Jacobs Chuck
Jacob's Chuck
Button Pullers
Button Pullers
Tape Grips
Tape Grips
Wire Wrapping Grip
Wire Wrapping Grip
Wedge Grips
Wedge Grips
Wire Grip
Wire Grip
Multi Terminal Grips
Multi Terminal Grips
Peeling
Peeling
Friction Tester
Friction Tester
Vise Chuck
Vise Chucks
Jacobs Chuck
Other


please call us

Force gauge attachments screw in directly to the measuring shaft of the force gauge. Imada offers a variety of attachments for a wide range of applications. All Imada force gauges include a set of standard attachments.

PS and low capacity ZT Series kits include all attachments. FB and DS2 kits include all force gauge attachments except large hook and Y-hook.
PSH and high capacity Z Series kits include all attachments. ESH kits include hook, flathead, handles and mounting screws.

  • Series A- 20 lbf maximum capacity
  • Series S- 110 lbf maximum capacity
  • Series SH- 220 lbf maximum capacity
  • Series B- 1100 lbf maximum capacity

Small Hook
SH-1 220 lbf capacity
Imada SH-1 220 lbf capacity
$25.00

Small hook force gauge attachment, suitable for most tension tests

Hook for Cardboard Boxes
DF-60
Imada DF-60 44 lbf capacity
$145.00

Test seal strength with the hook for cardboard boxes. Width: 60mm






Large Flat Heads
Imada AA-100 (100mm)
Imada AA-100 (100mm)
with Rigid Joint

$125.00

Large Flat Heads are suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 220 lbf capacity
Swivel Compression Plates
PC-5040
Imada PC-5040 (40mm)
with Flex Joint

$95.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity
Swivel Compression Plates
PC-5060
Imada PC-5060 (60mm)
with Flex Joint

$145.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity
Swivel Compression Plates
 PC-5100
Imada PC-5100 (100mm)
with Flex Joint

$195.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity

Swivel Compression Plates
SQ-5030
Imada SQ-5030
30x20mm Rectangle

$95.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity
Swivel Compression Plates
SQ-507
Imada SQ-5075
75x50mm Rectangle

$135.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity
Swivel Compression Plates
SQ-5150
Imada SQ-5150
150x100mm Rectangle

$195.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity

Swivel Compression Plates
SP-5010
Imada SP-5010
10mm Sphere

$95.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity
Swivel Compression Plates
SQ-507
Imada SP-5020
20mm Sphere

$135.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity
Swivel Compression Plates
SQ-5150
Imada SP-5030
30mm Spheres

$195.00

Swivel Compression Plates suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. 1100 lbf capacity


Burst Compression Fixtures
PR-500N
Imada PR-500N
110 lbf capacity

$815.00

Large Compression Fixtures test the burst strength of larger packages.
Burst Compression Fixtures
SQ-507
Imada PR-2500N
550 lbf capacity

$985.00

Large Compression Fixtures test the burst strength of larger packages.
Puncture Fixtures for Films
TKS-20N
Imada TKS-20N
4.4 lbf capacity

$475.00

Use the puncture fixtures for films to secure the test sample and check the strength of liquid crystal film, auto battery covers, thin aluminum, PET bottles, retort pouches, etc.
Puncture Fixtures for Films
TKS-250N
Imada TKS-250N
55 lbf capacity

$665.00

Use the puncture fixtures for films to secure the test sample and check the strength of liquid crystal film, auto battery covers, thin aluminum, PET bottles, retort pouches, etc.

Bend Stands
GA-10N
Imada GA-10N
60mm wide, 220 lbf capacity

$560.00

Use bend stands to support test rods, strips, etc. to check their strength.
Bend Stands
GA-5000N
Imada GA-5000N
60mm wide, 1100 lbf capacity

$885.00

Use bend stands to support test rods, strips, etc. to check their strength.

Roller Cam Grip
SP-5010
Imada GP-15
50 lbf capacity

$345.00

Roller Cam Grip is mounted to the gauge, cam action grips wire and elastomers up to 4.5mm.
Roller Cam Grip
SQ-507
Imada GR-30
110 lbf capacity

$325.00

Cam Grips are ideal for tensile testing of thin, narrow samples. for samples up to 30mm wide and 2mm thick
Roller Cam Grip
SQ-5150
Imada GR-2000
440 lbf capacity

$350.00

Cam Grips are ideal for tensile testing of thin, narrow samples. for samples up to 50mm wide and 4mm thick

Thin Film Grips
FC-20
Imada FC-20
20mm wide

$145.00

Grips thin film samples up to 2mm thick for tensile testing. 110 lbf capacity
Thin Film Grips
FC-40
Imada FC-40
40mm wide

$145.00

Grips thin film samples up to 2mm thick for tensile testing. 110 lbf capacity
Thin Film Grips
FC-21U
Imada FC-21U
(20mm wide with urethane teeth)

$265.00

Grips thin film samples up to 2mm thick for tensile testing. with urethane teeth
Thin Film Grips
PG-3
Imada FC-21UQ
(20mm) Quick Grip

$385.00

Use the penetrating Pin to check the hardness of clay-like materials, the burst strength of plastic coverings, etc. 44 lbf capacity
Thin Film Grips
PG-4
Imada FC-41U
(40 mm)

$265.00

Use the penetrating Pin to check the hardness of clay-like materials, the burst strength of plastic coverings, etc. 44 lbf capacity
Slant Film Grips
PG-4
Imada CH-50U
Slant Grip (22 lbf)

$940.00

Slant Film Grips are designed to hold zipper bags to test their seal. Sample thickness: 0-1mm


Fine Point Chucks
FP-51
Imada FP-51
0.5mm wide, 11 lbf capacity

$145.00

Roller Cam Grip is mounted to the gauge, cam action grips wire and elastomers up to 4.5mm.
Small Chucks
SC-3
Imada SC-3
3mm wide, 22 lbf capacity

$145.00

Cam Grips are ideal for tensile testing of thin, narrow samples. for samples up to 30mm wide and 2mm thick
Small Chucks
SC-8
Imada SC-8
8mm wide, 35 lbf capacity

$145.00

Cam Grips are ideal for tensile testing of thin, narrow samples. for samples up to 50mm wide and 4mm thick
Pin Grip
CP-150N
Imada CP-150N
0-3.2mm diameter 22 lbf capacity

$125.00

Pin grip accommodates small diameter wires and filaments

Flat Chucks
GC-1100
Imada GC-1100
10mm open, 220 lbf capacity

$185.00

Square serrated face, heavy duty flat chucks. Ideal for pulling thin, flat objects.
Flat Chucks
GC-1200
Imada GC-1200
20mm open, 220 lbf capacity

$185.00

Square serrated face, heavy duty flat chucks. Ideal for pulling thin, flat objects.
Flat Chucks
GC-5000
Imada GC-5000
30mm open, 1100 lbf capacity

$480.00

Square serrated face, heavy duty flat chucks. Ideal for pulling thin, flat objects.
Jacob?s Chucks
GC-5
Imada GC-5
5mm, 110 lbf capacity

$145.00

Use Jacob?s Chucks to grip shafts and rods.
Jacob?s Chucks
GC-15
Imada GC-15
13mm, 220 lbf capacity

$145.00

Use Jacob?s Chucks to grip shafts and rods.

Button Pullers
BP-6
Imada BP-6
6 ? 25 mm, 30 lbf capacity

$360.00

Imada'S unique button pullers adjusts to grip buttons, etc.
Button Pullers
BP-440
Imada BP-440
440 lbf capacity

$450.00

Imada'S unique button pullers adjusts to grip buttons, etc.
Button Holding Fixture
BC-15
Imada BC-15
Up to 15mm diameter Up to 3.5mm height 6.7 lbf capacity

$725.00

Use the button holding fixture and button gripping attachments to check the tensile strength of sewed buttons.


Tape Grips
TG-30
Imada TG-30
30mm wide

$280.00

Self-tightening ?buckle-type?mechanism tape grips ensure slip-free operation. 110 lbf capacity
Tape Grips
TG-50
Imada TG-50
50mm wide

$350.00

Self-tightening ?buckle-type?mechanism tape grips ensure slip-free operation. 110 lbf capacity
Wire Wrapping Grip
WC-30
Imada WC-30
110 lbf capacity

$280.00

Use wire wrapping grips to test the tensile strength of wires, filaments, fibers, etc.
Wire Wrapping Grip
WC-2000
Imada WC-2000
440 lbf capacity

$350.00

Use wire wrapping grips to test the tensile strength of wires, filaments, fibers, etc.



Wedge Grips
KC-100
Imada KC-100
110 lbf capacity

$430.00

This spring-loaded wedge grip is ideal for tensile measurements of thick materials.
Wedge Grips
KC-1001
Imada KC-1001
220 lbf capacity

$430.00

This spring-loaded wedge grip is ideal for tensile measurements of thick materials.
Wedge Grips
KC-5000
Imada KC-5000
1100 lbf capacity

$595.00

This spring-loaded wedge grip is ideal for tensile measurements of thick materials.
Pincer Wedge Grips
PGC-0510
Imada PGC-0510
110 lbf capacity

$395.00

Pincer Wedge Grips are all purpose jaw grips.
Jaw face width: 10mm Opening width: 0-15mm
Wire Wedge Grips
CW-500N
Imada CW-500N
110 lbf capacity

$475.00

Opening width: 5mm
Easy-to-clamp, spring-loaded wire wedge grip


Wire Terminal Grips
WG-1
Imada WG-1
smooth jaw 220 lbf capacity

$155.00

Grips the wire terminal without holding the wire jacket for pull tests. Spring loaded 20mm jaws open to 5mm
Wire Terminal Grips
WG-2
Imada WG-2
serrated jaw 220 lbf capacity

$155.00

Grips the wire terminal without holding the wire jacket for pull tests. Spring loaded 20mm jaws open to 5mm
Wire Terminal Grips
CH-500N
Imada CH-500N
110 lbf capacity

$275.00

Grips for wire terminal testing, opens to 6mm.
Wire crimp terminal grip
CH-5000N
Imada CH-5000N
1100 lbf capacity

$285.00

Check wire crimp terminals with these test fixtures. Wire crimp terminal grip (6-12mm diameter)
Wire fixture table
CW-5000N
Imada CW-5000N
1100 lbf capacity

$975.00

Check wire crimp terminals with these test fixtures. Wire fixture table (30mm diameter)


Multi Terminal Grips
WG-3
Imada WG-3
8-30 AWG, 220 lbf capacity

$250.00

WG-3 Multi Terminal Grips have 12 wire gauge apertures (up to 8mm) on the turret. Locate and lock the appropriate size.
Wire Terminal Grips
WG-3XL
Imada WG-3XL
3-14 AWG, 500 lbf capacity

$385.00

WG-3 Multi Terminal Grips have 12 wire gauge apertures (up to 8mm) on the turret. Locate and lock the appropriate size.
Wire Cam Grip
WG-300
Imada WG-300
220 lbf capacity

$175.00

Cam action grips wires quickly and easily up to 6mm.
Wire Vise Chuck
WG-100
Imada WG-100
220 lbf capacity

$150.00

Screw tightened vise chucks for slip-free gripping of test samples. May also be used as a Vise Wire Grip.
Wire Vise Chuck
CW-5000N
Imada CW-5000N
1100 lbf capacity

$975.00

Check wire crimp terminals with these test fixtures. Wire fixture table (30mm diameter)


45 Degree Peel Bearing Table
P45-50N
Imada P45-50N
45 Degree Peel Slide Bearing Table

$1435.00

11 lbf capacity
Sample height: 10 to 90mm
Sample diameter: 20-140mm
The 45 Degree Peel Fixture securely holds cups to peel off the sealed lid.
90 Degree Peel Table (Economical)
GT-30-1
Imada GT-30-1
44 lbf 10mm wide, 300mm long

$425.00

Use the 90 Degree Peel Table in adhesion tests.
90 Degree Peel Table (Economical)
GT-30-1-LF
Imada GT-30-1-LF
low force 10mm wide, 300mm long

$675.00

Use the 90 Degree Peel Table in adhesion tests.
Wire Vise Chuck
P90-200N
Imada P90-200N
low force

$1185.00

Sample length: 155mm
Sample width: 80mm
90 Degree Peel Table is bearing mounted and slides to maintain angle in peel tests.
Wire Vise Chuck
P90-200N-EZ
Imada P90-200N-EZ
44 lbf capacity

$850.00

Sample length: 155mm
Sample width: 80mm
90 Degree Peel Table is bearing mounted and slides to maintain angle in peel tests.
Peeling Attachments
PF-1
Imada PF-1
for pull

$280.00

110 lbf capacity
Peeling attachments for push or pull test bonding strength, peel force of laminated materials, etc.
Peeling Attachments
PF-2
Imada PF-2
for Push

$280.00

110 lbf capacity
Peeling attachments for push or pull test bonding strength, peel force of laminated materials, etc.
Rotary Peeler
RP-1
Imada RP-1
1.125? Wide 6? Diameter

$360.00

Aluminum wheel for testing tape adhesion


Coefficient of Friction Tester
 COF-2N
Imada COF-2N Stroke
150mm capacity 2N

$1565.00

Coefficient of friction tester attachment is suitable for motorized horizontal test stands.
Coefficient of Friction Tester
COF-2N-V
Imada COF-2N-V Vertical
150mm capacity 2N

$1320.00

Coefficient of friction tester attachment is suitable for motorized horizontal test stands.
Coefficient of Friction Tester
COF-10N
Imada COF-10N Stroke
150mm capacity 10N

$1565.00

Coefficient of friction tester attachment is suitable for motorized horizontal test stands.
Coefficient of Friction Tester
COF-10N-V
Imada COF-10N-V Vertical
150mm capacity 2N

$1320.00

Coefficient of friction tester attachment is suitable for motorized horizontal test stands.


Vise Chuck
WG-100
Imada WG-100
220 lbf

$150.00

Screw tightened vise chucks for slip-free gripping of test samples. May also be used as a Vise Wire Grip
Vise Chuck
GT-30
Imada GT-30
220 lbf capacity

$150.00

38mm wide jaw opens to 39mm, Screw tightened vise chucks for slip-free gripping of test samples. May also be used as a Vise Wire Grip.
Vise Chuck
GT-500
Imada GT-500
500 lbf

$425.00

38mm wide jaw opens to 39mm, Screw tightened vise chucks for slip-free gripping of test samples. May also be used as a Vise Wire Grip.
Center-open Vise Grip
GTW-50R
Imada GTW-50R
- 110 lbf

$425.00

Center Open Vise Grip is available in dial or lever models and holds test samples while keeping them centered. Jaw face width: 50mm.
Center-open Vise Grip
GTW-50L
Imada GTW-50L
- 220 lbf

$425.00

Center Open Vise Grip is available in dial or lever models and holds test samples while keeping them centered. Jaw face width: 50mm.


T-Slot Table
TS-5000N
Imada TS-5000N
1100 lbf

$395.00

Use the T-Slot Table for easy exchanging and positioning of grips.
Travel on X: 150mm
Travel on Y: +/- 15mm
Thin X-Y Table
XY-500N
Imada XY-500N
tension, compression

$1435.00

The Thin X-Y Table has a lower profile for maximum clearance on vertical test stands.
110 lbf capacity for tension
220 lbf capacity for compression
Travel on X, y: +/- 30mm
Hook for Cardboard Boxes
DF-60
Imada DF-60 44 lbf capacity
$145.00

Test seal strength with the hook for cardboard boxes. Width: 60mm
Optional Handle
OH-1
Imada OH-1
$85.00

Handle for DS2,ZTS,ZTA Gauges

 

View Cart | Specials | Contact Us | Home | Blog | Sitemap | Store Policies | Your Account

For Orders, Phone toll-free 800-832-0055
All other inquiries, please phone 718-336-5900
FAX 718-627-1313
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



Scales & Equipment: Value Electronic Scales | Value Mechanical Scales | Lab / Analytical Scales | Baby Scales | Bathroom Scales | Bariatric Scales | Body Fat Monitors | Pro Body Composition Monitors | Calibration Weights | Counting Scales | Crane ScalesDeli/Food/Grocery Scales | Dynamometers | Fish/Game Scales | Floor Scales | Force Gauges | Industrial-Use Scales | Jewelry Scales | Livestock Scales"Legal for Trade" Scales | Medical Scales | Moisture Analyzers | Pallet Scales | Pocket ScalesPortable Spring Gauges | Shipping Scales  | Specialty Medical Scales | Test Stands / Force Measurement | Veterinary Scales


Fitness Products: Polar Heart Rate Monitors


Manufacturers: Acculab digital scales | AND electronic scales | Best Weight mechanical scales| Detecto Physician's Scales | CAS digital scales | Chatillon/Ametek mechanical and electronic scales | DigiWeigh Economical Scales | Dillon Crane Scales, Dynamometers & Force Testing Products| Easy Weigh Legal for Trade Scales | Health O Meter Scales | Hoto Instruments | Imada Force Measurement | InScale Floor Scales | Mark-10 Force Testing | Mettler Toledo® | Minx Economical Pocket Scales | Ohaus electronic and mechanical scales | Tanita digital scales | Salter Brecknell | Sartorius Lab Balances | Seca Medical Scales | Siltec Shipping Scales | Great Gift Ideas



© 2000- scalesgalore.com   All rights reserved.